@SC_Dave, I would agree with GJM on trying a micro press out, or press out. I didn't slow down the video but at first glance it looks as if you are swinging the gun upward and not punching out or pressing out. A press out would give you more time to acquire the dot, decelerating just prior to breaking the shot as in GJM's micro press out would give you more time for trigger prep and allow for a consistent and smooth press without stopping. He, (GJM) is absolutely correct in his statements regarding the trigger work not that he needs my validation. It would also be good to have some video of you at the ejection port side, (or and angled shot, camera more forward of you but angled back so we can see the trigger finger) so we can see what your trigger finger is doing and when you start trigger prep in relation to deceleration of the gun. In addition, and I mean no snark in this but you really need to work on your reholstering. You need to slow down, break from the drill rotate your hips properly and look your gun into the holster. If you have a gadget you aren't using it, if you don't I highly recommend spending the money on one and use it as intended it will greatly reduce risk. If you choose not to no biggie but at least slow down and reholster properly.