This seems to work: https://defendertactical.com/products/highball
This seems to work: https://defendertactical.com/products/highball
One reason I like these:
https://xssights.com/products/big-do...-mossberg.html
Back when I was the Chief for a small village in Nebraska, I had the town purchase a T&E Mossberg 590DA1, then had a local-ish gunsmith take 2" off the synthetic stock and install an XSBD. I was able to decently bust clays when wringing the combo out. If I could have, I'd have bought the gun from the village in a heartbeat.
"It's surprising how often you start wondering just how featureless a desert some people's inner landscapes must be."
-Maple Syrup Actual
I had a client last week who bought an SXP "Extreme" Defender:
https://www.winchesterguns.com/produ...ender-fde.html
The "door breacher" choke tube on the thing was fucking ridiculous.
The length of pull on the stock was stupidly long. And the pistol grip didn't help getting to the action release.
It looked goofy as hell.
...but it worked. It ran smoothly. Extraction and ejection were smooth. It has an actual chrome-lined bore and chamber. It patterned extremely well with FFC. The sights were kind of goofy but they were well regulated and allowed accuracy with all the slugs and buckshot I tried in the gun. The heat shield/accessory rail thing they put on it makes taking it apart more complicated than it has to be, but apart from looking like a complete simpleton drew it the fundamentals of the gun weren't bad at all.
If you could put a sensible choke on the thing, swap the goofy pistol-gripped stock for the 12" stock from the Field Micro on it:
https://www.winchesterguns.com/produ...eld-micro.html
...and ditch the somewhat goofy heat shield/rail on it, you'd have a pretty solid gun.
The 1200/1300's seem to have more felt recoil than any other pump gun for whatever reason, but apart from that of the "budget" guns out there one of the Winchesters with some reasonable sights doesn't strike me as a particularly bad option.
Unfortunately my client paid $500 for his from Cabelas during the height of pandemic paranoia.
3/15/2016
I had a client this past weekend with a brand new 590 who asked the same question.
He bought it based on "the guy at the gun store said" and had no real experience with firearms before. And he had never shot this one.
"Why would they make it this way if it doesn't work well?"
I responded: "Well, the gun company is in business to get you to buy a shotgun. Their mission is accomplished."
"Good point."
Luckily for those of you stuck with a Mossberg with a terrible bead sight, there's an option. One of those would be immensely helpful.
To my surprise, his gun ran extremely well. None of the issues I've seen on a lot of new Mossbergs lately. The action ran smoothly and I could bust out .27 splits with it. It extracted and ejected properly. The wood on it was even nice, although too long for him. It patterned FFC brilliantly at 15 yards.
3/15/2016
Thanks @TCinVA! The one on sale is the bog standard Defender which is bead only and doesn’t appear to be d&t based on the website pictures. I’ve already burned through the fun budget for the year but it looks like it could be a solid suggestion for the “What shotgun should I buy?” question in addition to the Maverick 88 (because the people asking are usuallycheap assesfrugal).
That Defender Tactical sight looks interesting. I’m curious if the short sight radius is an issue if running irons only.
Nothing so needs reforming as other people's habits - Mark Twain
Tact is the knack of making a point without making an enemy / Where is the wisdom we have lost in knowledge?
My 22 inch vent rib barrel Mossberg shoots very high and did so with an identical borrowed barrel. Mossberg once sold shims to adjust pitch in 12 ga guns. The shims were placed between stock and receiver to raise or lower the stock's position in relation to the receiver. Though their purpose is adjusting fit, they can be used to change p.o.i. Kickeze the recoil pad company sells spacers to place between recoil pad and stock. Spacers are thicker on one end and thinner on the other. To experiment you can place plastic washers between one pad screw and the stock. My intent was correcting pattern placement for wing shooting. Using a higher bead is not a best practice for wing shooting but would be for slug or buckshot use.
I tinker with Mossbergs and got good at it. I regret today that the older guns from 25 years ago were better made. However, when you see a Mossberg on a used gun rack, you very likely will get a good deal. Too, you can take time to examine it closely. They have very low resale value which makes them be priced cheap as used guns.
Gun makers have good and bad runs of products. They often outsource parts. Once Mossberg sold a ton of 500's with defective shell latches. Then they did the same thing with mag springs. There was a big run of adjustable sights on 590 guns, and most had crooked front sights. But when their components are to spec, Mossberg can make an ok shotgun.
My opinion is that Mossberg more closely inspects gun designated to be shipped to law enforcement. Hence one of these is a better choice.
.
"It's surprising how often you start wondering just how featureless a desert some people's inner landscapes must be."
-Maple Syrup Actual