Forgot a couple of pics: a magazine full (19 rounds) of Geco ball at 6 yard and another at 25 yards to finish up the test.
Forgot a couple of pics: a magazine full (19 rounds) of Geco ball at 6 yard and another at 25 yards to finish up the test.
I just finished 2000 rounds through my Glock 30 SF 45 ACP.
500 rounds of 230 ball Prime Ammo.
500 rounds of 230 ball Blazer brass.
500 rounds of 230 HP LAX Ammo.
500 rounds of 230 ball military surplus.
Stoppage: 0
Malfunction: 0
Breakage: 0
I do have one caveat, at about 1600 rounds, my son accidentally wiped the frame, slide, and barrel while we were cleaning some other pistols. We did not add any lubrication. I will add some more details later.
Just a quick follow up to my post as I am home from the desert and on my computer. In terms of the ammo, the Prime shot the best, was the cleanest, and ejected in the most predictable pattern. Next up was the GI Ball and the LAX reloads. They both shot well and were clean. The Blazer brass was the worst. It seemed to be the dirtiest, ejection was erratic, but 100%, and accuracy was just so/so. If I were buying cheap to stack deep, I would just continue with the LAX ammo.
Like the Scoutish rifle thread in the rifle form, I got this pistol to be legal in all of the areas where I travel, camp, and hunt in the west. I also wanted a gun that I could CCW and that had enough power for the animals I might encounter. This is a tall order and I still have a couple of back up options. I wanted the gun to be simple, easy to maintain, reliable, and accurate. I looked hard at the HK USP's, but the simplicity of the Glock won out. Last night I was able to completely disassemble it for a deep cleaning in less than two minutes. I like to carry the LoneWolf Spyderco knife with the disassembly tool in the handle, so I am pretty much always good to go. I have also used a nail from a fence post in past. I generally travel around AZ, CA, UT, WY, CO, and MT. In CA I am limited to 10 rounds and that is what initially drew me towards the 30SF. For the vast majority of those places this pistol works great. I will now work on loading up some Lehigh Defense Xtreme penetrators for the areas with larger critters and keep my big bore handguns around as well. No solution is perfect, but this one is working out great so far.
Sorry for the rambling post. Wishing a good day to all.
Matt
Pistol: Beretta/Langdon Tactical Elite 92G 'Carry Bevel'
Caliber: 9mm
Ammunition: 1462 American Eagle 147 grain FMJ, 500 American Eagle 115 grain FMJ, 103 Federal 147 grain HST JHP.
Dates of testing: 12/21/19 - 2/1/20
Total rounds fired: 2065
Stoppages: 0
Malfunctions: 0
Breakages: 0
Comments: I recently completed a 2,000 Round Challenge with my Langdon Tactical Elite 92G 'Carry Bevel'. I initially had some light strikes with this pistol when using a 13# hammer spring, so I moved to a 14# spring prior to the start of this test. The pistol was liberally lubricated with Lucas Extreme Duty Gun Oil. Upon field stripping the pistol at the end of the test, I found the slide rails were dry but lube was still visible along the locking block.
Generally, I would not recommend going 2000 rounds without cleaning in an all-metal pistol like the 92, but I wanted to vet this pistol after the initial problems with the lighter power spring.
"When the phone rang, Parker was in the garage, killing a man."
Pistol: CZ Shadow 2 Orange
Caliber: 9mm
Ammunition: Fiocchi 115gr, Magtech 115gr FMJ, Federal Syntech Training Match 147gr, Federal 147 grain HST JHP, Speer Gold Dot 124gr, Federal Syntech Action Pistol 150gr
Dates of testing: August 2019 - January 2020
Total rounds fired: 2160
Stoppages: 0
Malfunctions: 0
Breakages: 0
Bought it new last June & it has very quickly become my favorite handgun to shoot. The slide felt a bit gritty & like it was slowing down slightly during the last 200 rounds or so, but there hasn't been any real issues with the gun so far.
Pistol: CZ P-07, CGW Prograde Kit, 15# flat wire recoil spring, 13# hammer spring
Caliber: 9mm
Ammunition: 125gr Blue Bullets, 3.9gr VV N320, range pickup brass, CCI primers; Fed HST 147gr.
Dates of testing: 12/8/19 - 1/18/20
Total rounds fired: 2,020
Stoppages: 0
Malfunctions: 0
Breakages: 0
Comments:
I wanted to test this gun with a newly installed CGW Prograde kit and a 13# hammer spring. (I typically run #15 hammer springs in these guns). I was very happy with the results of this test. The gun was quite dirty, and the slide felt gritty, but the action remained smooth and ejection was very consistent. I shot a variety of drills, including WHO and SHO. I finished the 2000 round challenge with 16 rounds of Fed HST 147, my standard carry ammo. (Note: I now have 4450 rounds total through this gun, without any malfunctions.)
My conclusion is that the 13# hammer spring is acceptable for defensive use. Here is a comparison of the trigger pull weights:
15# Hammer spring, 0.018” sear spring
DA: 8.5 (stock weight 13.2 lbs)
SA: 3.25 lbs (stock weight 3.3 - 5.5lbs)
13# Hammer spring, 0.018” sear spring
DA: 6.75 (stock weight 13.2 lbs)
SA: 3.25 lbs (stock weight 3.3 - 5.5lbs)
[Dirty gun pictures below]
Last edited by Clusterfrack; 02-18-2020 at 10:29 PM.
“There is no growth in the comfort zone.”--Jocko Willink
"You can never have too many knives." --Joe Ambercrombie
Pistol: Glock G44
Caliber: .22
Ammunition:
700 CCI Minimag 40 grain HV plated round nose.
615 Aguila Super Extra 40 grain HV plated round nose
226 Remington Golden Bullet
Fiocchi 40 grain SV LRN
Winchester Match 40 grain SV T22 LRN
Federal Match 40 grain SV LRN
Armscor 40 grain SV LRN
CCI Velocitor 40 grain plated HP 1435 FPS
CCI Stinger 32 grain plated HP 1640 FPS
Dates of testing: 2/2020
Total rounds fired: 2000
Stoppages:
1 Stovepipe
4 FTExtract partial extraction. All weak rounds. All Remington Golden Bullet.
2 light strikes Aguila
1 FTLBE Armscor
Malfunctions: 0
Breakages: 0
I can’t say much bad about this gun. I consider it one of the best firearm purchases I have ever made. It has had zero stoppages of any kind in the final 1000 rounds of this test. It’s a keeper.
I installed a .205” tall Dawson fiber up front. With that and the rear clicked up two clicks from full low it is tip of front sight at 25 yards and drive the dot at 5 yards with Minimags.
The lack of recoil and ability to shoot a lot of round in a session is allowing me to see subtleties in my technique that are usually masked by recoil. I think it it making me a better shooter. I wish I had 50 mags for it.
I think the reliability has been stellar and it way exceeded my expectations in this regard.