Glock Picture Thread

[Gray222]

Since I searched and did not find an "official" glock picture thread, figured I'd start one...


http://i.imgur.com/TUVyCOv.jpg

[ssb]

http://i.imgur.com/1lfHRiq.jpg

The FDE slide gun gets carried a lot and shot not a lot as it's already been vetted (~3500 rounds). The black slide gun is my practice/backup gun. Both guns are set up almost identically:

- APEX FRE
- Reversed mag catch
- Grip Force Adapter
- Butt plug
- Trijicon HDs in orange
- 3M tape
- Slight undercut on trigger guard

The practice gun still has a Vickers slide stop, but the one on my carry gun proved unreliable. Eventually I'll buy an OEM slide stop for the practice gun. Also on my to-buy list is a pair of G17 smooth triggers.

[Gray222]

http://i.imgur.com/2TCpot5.jpg

[Wondering Beard]

http://i.imgur.com/2TCpot5.jpg

What is that knife?

[Gray222]

What is that knife?

Damascus skinner, custom cut handle

[Wondering Beard]

It's a beauty and looks quite effective.

Who made it?

[JDM]

http://i.imgur.com/2TCpot5.jpg

Clever watermarking!

[Gray222]

It's a beauty and looks quite effective.

Who made it?

Dont remember, have had it for a while.


Clever watermarking!
Thanks, I usually hide it better.

[Nephrology]

Old and not super hi res, but 2 of my favorites.

http://i.imgur.com/9NRZmxl.jpg

http://i.imgur.com/DX1x7tC.jpg

[Palmguy]

http://i1259.photobucket.com/albums/ii551/PalmguyFL/DSC_0184-Edit_zpsvelvo3qd.jpg

[Gray222]

http://i.imgur.com/hP0ARW0.jpg

[Lyonsgrid]

Very nice pics voodoo_man.
That 19 has been in/out of a holster once or twice.

[Lyonsgrid]

3422

1986

[Lyonsgrid]

3423

1st duty weapon - G22

[Gray222]

Very nice pics voodoo_man.
That 19 has been in/out of a holster once or twice.

Thanks, thats my edc g19, 35k rounds and counting.

[Coyotesfan97]

3427

My issued Gen 4 Glock 17


Sent from my iPhone using Tapatalk

[Coyotesfan97]

3428

My Gen 2 Glock 19 police trade in. I had it cerakoted FDE. It has Trjicon HD sights on it.


Sent from my iPhone using Tapatalk

[Irelander]

Heres my Gen3 G19.

https://dl.dropboxusercontent.com/u/47624012/G19%20EDC.JPG

[23JAZ]

http://i1277.photobucket.com/albums/y494/Glocker321/G193_zps4p9snvdb.jpg (http://s1277.photobucket.com/user/Glocker321/media/G193_zps4p9snvdb.jpg.html)http://i1277.photobucket.com/albums/y494/Glocker321/G192_zpsmnjrchrv.jpg (http://s1277.photobucket.com/user/Glocker321/media/G192_zpsmnjrchrv.jpg.html)URL=http://s1277.photobucket.com/user/Glocker321/media/G19_zpswn2lwgw7.jpg.html]http://i1277.photobucket.com/albums/y494/Glocker321/G19_zpswn2lwgw7.jpg[/URL]

[P.E. Kelley]

http://www.multigunmedia.com/img/s2/v58/p1329589206-4.jpg

[Gray222]

http://www.multigunmedia.com/img/s2/v58/p1329589206-4.jpg

Longslide in the house!

http://i.imgur.com/4ZjSu2E.jpg

[P.E. Kelley]

Yup. some like them long...
http://www.multigunmedia.com/img/s4/v10/p2030349996-4.jpg

[Byron]

Longslide in the house!
Why the choice of such tall sights? I usually only see irons like that in conjunction with a suppressor or RDS. Just curious.

[Gray222]

Why the choice of such tall sights? I usually only see irons like that in conjunction with a suppressor or RDS. Just curious.

Have a gm9 in jail and a silencerco threaded barrel on its way.

[Byron]

Ah, gotcha. That will be a sick setup!

[hurley842002]

G19 top, G43 bottom. Perfect combo IMO.

http://images.tapatalk-cdn.com/15/05/28/2924e807f957de4ab61ca8ef054be4e1.jpg

http://images.tapatalk-cdn.com/15/05/28/1ddf1f534b2061c1e16b7a9a7434b4e2.jpg

[Little Creek]

G19 top, G43 bottom. Perfect combo IMO.

http://images.tapatalk-cdn.com/15/05/28/2924e807f957de4ab61ca8ef054be4e1.jpg

http://images.tapatalk-cdn.com/15/05/28/1ddf1f534b2061c1e16b7a9a7434b4e2.jpg

I second that! It looks like my pistols posed for your picture.

[P.E. Kelley]

TTI long slide anyone?
http://www.multigunmedia.com/img/s6/v144/p1213093171-4.jpg

[hurley842002]

I second that! It looks like my pistols posed for your picture.
Lol

[Gray222]

http://i.imgur.com/QI89rt7.jpg

[Irelander]

Longslide in the house!

http://i.imgur.com/4ZjSu2E.jpg

Did you chop that G17L grip down to G19 length?

[Gray222]

Did you chop that G17L grip down to G19 length?

It is a lower from another g17, but yes.

[Irelander]

Cool, like a G19XL. I've been wanting to get a G17 and chop it to G19 length. How does the G19XL carry AIWB?

[Gray222]

Cool, like a G19XL. I've been wanting to get a G17 and chop it to G19 length. How does the G19XL carry AIWB?

Its tough....really rubs the junk

[breakingtime91]

Its tough....really rubs the junk

ouch..

[NickDrak]

http://i40.photobucket.com/albums/e213/Nikko_Choculich/20150619_115650_zpsuvln9uei.jpg

[Luke]

Now that's sexy! ^^

I'm getting one stippled next week and trying to decide between stippling the beaver tail or not. I want too, but that part of the hand doesn't have as much calas material in that area.. You like it? Also! What trigger is that?

[NickDrak]

Now that's sexy! ^^

I'm getting one stippled next week and trying to decide between stippling the beaver tail or not. I want too, but that part of the hand doesn't have as much calas material in that area.. You like it? Also! What trigger is that?

The way Damon (SSVI, LLC) did the stippling underneath the beavertail is completely for aesthetics. It is almost completely smooth to the touch. The rest of the stippling is far more aggressive.

The trigger is the Agency Arms drop-in. I'm digging it very much.

The ZEV "slim" magwell will only be used for matches. I'm planning on picking up one of the Agency Arms low profile magwells once they release theirs for the Gen4 G17.

[Irelander]

I figured it was time for a new pic of my G19.

https://dl.dropboxusercontent.com/u/47624012/G19_mine%20-%20Copy.jpg

Soon to have a smooth G17 trigger.

[Lost River]

Gen 3 G19


http://i18.photobucket.com/albums/b109/IV_Troop/G19Badger.jpg (http://s18.photobucket.com/user/IV_Troop/media/G19Badger.jpg.html)

[Lost River]

http://i18.photobucket.com/albums/b109/IV_Troop/035.jpg (http://s18.photobucket.com/user/IV_Troop/media/035.jpg.html)

[Eli]

My EDC. Chopped 17 with an Apex FRE, 10-8 rear, and Ameriglo front. It's also got a polished 3lb connector and a NY1 TRS.

http://i228.photobucket.com/albums/ee95/ceelfi/hst1.jpg

http://i228.photobucket.com/albums/ee95/ceelfi/my%20edc%203.jpg

My "around the house" gun is a Gen-4 17. It's been de-finger grooved, undercut, a small amount of stippling, and is wearing the same sights and trigger as my EDC gun. It also acts as my back up gun for classes.

http://i228.photobucket.com/albums/ee95/ceelfi/my%20edc%204.jpg

http://i228.photobucket.com/albums/ee95/ceelfi/classstuff.jpg


I also have a 19 that's set up identically to the EDC 17 and a 34 that's wearing Warren Tactical sights. They've both been in the safe for quite some time.....I'll try to get them out and snap some pics in the next few days.

[Eli]

My 19, which is set up identically to the chopped 17. As you may be able to tell, this was my first attempt at stippling, it's about the ugliest damned thing I've ever seen.......but it worked.

http://i228.photobucket.com/albums/ee95/ceelfi/my%20edc%206.jpg


My 34, it's wearing de-horned Warren Tactical sights, FO front and has a stock 34 trigger that's been through the 25 cent trigger job. It's also wearing the extended slide release which is there for the very valid reason of.......I just haven't gotten around to changing it yet. :)

http://i228.photobucket.com/albums/ee95/ceelfi/my%20edc%208.jpg


It would be neat to have a 17L and a 26 just to round out the collection, but they'd never get shot, so unless I get them as gifts, I don't ever see myself picking either one of them up.

http://i228.photobucket.com/albums/ee95/ceelfi/my%20edc%207.jpg

[El Cid]

Keeping the longslide thing going in case not everyone saw the 6SM thread.

http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/FullSizeRender_zps5724adca.jpg

[MD7305]

That's gotta be a hoot to shoot! Nice set up.

[Gray222]

http://i.imgur.com/HsZ09qs.jpg

[willowofwisp]

New KKM comp on my 19.

https://farm6.staticflickr.com/5676/20086460414_c25bc129aa_z.jpg (https://flic.kr/p/wAYmT1)IMG_4182 (https://flic.kr/p/wAYmT1) by SiDave (https://www.flickr.com/photos/53409939@N06/), on Flickr

[Gray222]

http://i.imgur.com/B9TtQtP.jpg

[S.W.]

https://41.media.tumblr.com/bb0d3a42fff177adfc67702cdd35ce16/tumblr_ntmjhkwh511ux6c75o4_r1_1280.jpg

[ssb]

Removed the finger grooves, did an undercut, and did a full stipple on one of my G19s this afternoon. First serious attempt at stippling. Not professional quality by any means but so far it feels good.

http://i.imgur.com/ZHOp1wA.jpg

[Gray222]

http://i.imgur.com/aS3Hv9R.jpg

[45dotACP]

http://i.imgur.com/aS3Hv9R.jpg
Is that a chopped 17L? I've thought about picking up a frame for a 17, then playing mix and match with a 17 and 34 upper...

[Gray222]

Is that a chopped 17L? I've thought about picking up a frame for a 17, then playing mix and match with a 17 and 34 upper...

Yeah, im a fan.

[Gray222]

http://i.imgur.com/XXblS3d.jpg

[Gray222]

http://i.imgur.com/G7L1Jan.jpg

[Gray222]

http://i.imgur.com/PZvbWbH.jpg

[ASH556]

New carry gun: Gray Frame Gen 4 G19 in JMCK V3
http://i854.photobucket.com/albums/ab104/ASH556/7CA6D8D9-091B-427E-BDE8-ACEE75955BA8.jpg
http://i854.photobucket.com/albums/ab104/ASH556/6341A32F-1C88-4677-8909-7AC1149D54A4.jpg

[Gray222]

http://i.imgur.com/IxOHwUD.jpg

[23JAZ]

https://pistol-forum.com/attachment.php?attachmentid=3967&stc=1https://pistol-forum.com/attachment.php?attachmentid=3967&stc=1

[ReverendMeat]

3972.

[Cookie Monster]

Jay23,

Who did the grip work? Looks nice. Been looking at an FDE Glock.

[Gray222]

http://i.imgur.com/FVxZn4C.jpg

[Gray222]

http://i.imgur.com/auMCOVZ.jpg

[Gray222]

http://i.imgur.com/7PVSxYC.jpg

[Isaac]

Let's see your future watch with that stippled one in the bottom left corner! Good photog skills (IMO). And an EDC pile on the nightstand in darker real life lighting.

[Gray222]

Let's see your future watch with that stippled one in the bottom left corner! Good photog skills (IMO). And an EDC pile on the nightstand in darker real life lighting.

Future watch?

Which one ;)

[23JAZ]

Jay23,

Who did the grip work? Looks nice. Been looking at an FDE Glock.

I did all the grip work myself. It is the first and only one I've ever done. Practiced on some P-Mags and the extra backstraps that came with the gun for a while before I took the plung. The half moon cuts were fairly simple I just found a washer the size i wanted the cuts to be measured the placement and marked it up.

[Isaac]

Future watch?

Which one ;)

Let us pick! muaahaha

[Appalachained]

Stock. with Warren sightshttp://images.tapatalk-cdn.com/15/10/12/04b22db2a8eaa8548084e3c6521210f7.jpg


Sent from my iPhone using Tapatalk

[Irelander]

I did all the grip work myself. It is the first and only one I've ever done. Practiced on some P-Mags and the extra backstraps that came with the gun for a while before I took the plung. The half moon cuts were fairly simple I just found a washer the size i wanted the cuts to be measured the placement and marked it up.

Nice work. What is that slide release you are using?

[Cookie Monster]

Nice work. What is that slide release you are using?

Agree with the nice work, used just a straight tip on a soldering iron?

[Gray222]

http://i.imgur.com/KYqGWga.jpg

[23JAZ]

Nice work. What is that slide release you are using?
Ghost Extended Forward slide release. It's perfect for us lefties.

[23JAZ]

Agree with the nice work, used just a straight tip on a soldering iron?
I used a cutting tip for the outline (just an xacto knife tip that gets hot basically) and a fine tip for the stippling.

[Gray222]

http://i.imgur.com/qXLzMEl.jpg

[karmapolice]

https://c1.staticflickr.com/1/669/22318258226_231c2de7c1_h.jpg

[HCM]

https://c1.staticflickr.com/1/669/22318258226_231c2de7c1_h.jpg

How do you like the Roland Special ?

[karmapolice]

How do you like the Roland Special ?

So far, it's awesome. I got the slide back from ATEi on Monday and put around 400 rounds through it so far. This is my first pistol with a red dot sight and I'm learning the system.

[Dave Williams]

A bunch of my coworkers shot my G19 w/KKM comped barrel the other day. They loved it. No dot yet though.

[Kyle Reese]

Love the way your 19 is set up, Karmapolice.

[karmapolice]

Thanks guys! I owe it to Roland as he is known, he is the one who the concept and original was born from. It's a sweet pistol. Other than the slide work etc, it has a factory smooth face trigger, minus connector, and extended slide release. I can't wait to get some more range the me with it. I've also got a AIWB holster from Tony at JM custom kydex (ala Doc Roberts), and a Raven owb rig ordered just waiting on completion. Here's one more photo just for giggles ;)

https://c1.staticflickr.com/1/770/22156083400_5ea82c65e9_k.jpg

[jh9]

How do you like the Roland Special ?

Ok, pic thread if appropriate please move elsewhere but I can't help but notice the comp makes it the same size a (19 grip reduction'd) 34.

I've only shot a couple open guns. I don't shoot open. Most people say in order to actually maximize teh comp you need a lot of gas. Much more than a regular factory 9mm round provides.

If you shoot them side by side does the compensated 19 have less recoil than the 34? This would surprise me, as I've been VERY surprised how much less recoil a 35 has than a 22. Stretch that out to a 24 and it feels like a 9mm.

Anyway, I can only imagine the comp'd 19 shoots at best like the 34. Add a ported barrel to go with the open slide and it seems like adding a threaded barrel and comp is more expensive than just going with a 34 to start with.

What's the idea? Especially since the 34MOS is now available. I don't understand what this offers compared to a 34 or a ported 34.

[HCM]

Ok, pic thread if appropriate please move elsewhere but I can't help but notice the comp makes it the same size a (19 grip reduction'd) 34.

I've only shot a couple open guns. I don't shoot open. Most people say in order to actually maximize teh comp you need a lot of gas. Much more than a regular factory 9mm round provides.

If you shoot them side by side does the compensated 19 have less recoil than the 34? This would surprise me, as I've been VERY surprised how much less recoil a 35 has than a 22. Stretch that out to a 24 and it feels like a 9mm.

Anyway, I can only imagine the comp'd 19 shoots at best like the 34. Add a ported barrel to go with the open slide and it seems like adding a threaded barrel and comp is more expensive than just going with a 34 to start with.

What's the idea? Especially since the 34MOS is now available. I don't understand what this offers compared to a 34 or a ported 34.


http://youtu.be/G1PSsAWr2sw

[masternave]

I'm going to have to watch that video again, because the first time through I couldn't stop laughing at the expressions on the other range-goers in the background. Priceless.


Sent from my iPhone using Tapatalk

[HopetonBrown]

The colorfilled slide contributes to the flat shooting.


http://youtu.be/G1PSsAWr2sw

[karmapolice]

Ok, pic thread if appropriate please move elsewhere but I can't help but notice the comp makes it the same size a (19 grip reduction'd) 34.

I've only shot a couple open guns. I don't shoot open. Most people say in order to actually maximize teh comp you need a lot of gas. Much more than a regular factory 9mm round provides.

If you shoot them side by side does the compensated 19 have less recoil than the 34? This would surprise me, as I've been VERY surprised how much less recoil a 35 has than a 22. Stretch that out to a 24 and it feels like a 9mm.

Anyway, I can only imagine the comp'd 19 shoots at best like the 34. Add a ported barrel to go with the open slide and it seems like adding a threaded barrel and comp is more expensive than just going with a 34 to start with.

What's the idea? Especially since the 34MOS is now available. I don't understand what this offers compared to a 34 or a ported 34.

DocGKR posted a good thread about it here:https://pistol-forum.com/showthread.php?15857-G19-with-RMR06-and-KKM-compensator

For irons the G34 is king to me because of the increased sight radius and soft shooting. With a RDS mounted sight radius is less important. So therefore by going to a 19 and adding a comp, you get a shorter more concealable frame and reduced recoil with a slide no longer than a 34 without a top cutout. Also the MOS glocks cut out for the RDS are not as deep or well done as getting it done by ATEi who did my slide. Doug of ATEi requires the RMR that's being mounted to be sent with the slide as each has slightly different tolerances and he machines the slide based on your RMRs specs/tolerances.

Old pic of my 17, since it is a Glock picture thread.

https://c2.staticflickr.com/6/5731/22443736241_d88275b588_h.jpg

[23JAZ]

http://youtu.be/G1PSsAWr2sw
Where was that video shot? SGC?

[ffhounddog]

http://i.imgur.com/HsZ09qs.jpg

VDM why did you go with a S3F solutions over a Gemtech barrel? I decided on the surefire suppressor in 9 and I kind of just said looks like I am paying surefire prices since my simple logic is surefire uses surefire/zevtech barrels for their suppressors might as well use those but, how much of a difference is it like with a kkm barrel since those are king.

Feels odd paying less for a HK barrel than a Glock barrel...

[Gray222]

VDM why did you go with a S3F solutions over a Gemtech barrel? I decided on the surefire suppressor in 9 and I kind of just said looks like I am paying surefire prices since my simple logic is surefire uses surefire/zevtech barrels for their suppressors might as well use those but, how much of a difference is it like with a kkm barrel since those are king.

Feels odd paying less for a HK barrel than a Glock barrel...

I will probably end up going with a gemtech barrel down the road, nothing is written in stone and once I effectively use and review the s3f ill move on.

[HCM]

Where was that video shot? SGC?

Not my video but I believe the guy who posted it lives in nova.

Some thoughts on red dot pistols by the guy in the video:
http://www.practicallytactical.com/author/scott/

[ffhounddog]

I will probably end up going with a gemtech barrel down the road, nothing is written in stone and once I effectively use and review the s3f ill move on.

I am going to be following this closely. Cannot wait for the review to roll our. I have a Glock 19 slide to convert my g23 rtf2 to a suppressor host. Just debating on barrel.

[Gray222]

I am going to be following this closely. Cannot wait for the review to roll our. I have a Glock 19 slide to convert my g23 rtf2 to a suppressor host. Just debating on barrel.

I will tell you that you should get the best "match" branded barrel you can find, other than that you shouldn't put too much thought into it. I can say without hesitation that I have had pretty good experience with the s3f barrel over the OEM barrel in terms of accuracy and would buy another one right away. Ultimately the cream of the crop is the barsto I have and I would buy a threaded one if I really wanted something that was "the best" in all measurement, but you can buy 2 s3f barrels for the price of one barsto, so you need to make your own mind up there.

[Gray222]

http://i.imgur.com/yyAXExM.jpg

[Luke]

That's pretty cool there. We're did you find a front sight that was 2ft tall?

[Gray222]

That's pretty cool there. We're did you find a front sight that was 2ft tall?

http://i.imgur.com/m8U5Vbi.jpg

[spinmove_]

http://i.imgur.com/m8U5Vbi.jpg

That is an effing brilliant concept. That seems like it would work for a lot of different platforms.

[Gray222]

That is an effing brilliant concept. That seems like it would work for a lot of different platforms.

I agree, but of course, it will have to go through a vetting process and all that.

I'll be running it for a big on a 17 and see how it works out.

[spinmove_]

I agree, but of course, it will have to go through a vetting process and all that.

I'll be running it for a big on a 17 and see how it works out.

I'll definitely be looking out for updates on that. I've never shot a pistol equipped with a RDS, but that seems like it solves the iron sight co-witnessing issue.

[Luke]

Have you done any shooting with just the irons? Looks like it would be very hard to place accurate shots in a timely manner.

[Gray222]

Have you done any shooting with just the irons? Looks like it would be very hard to place accurate shots in a timely manner.

I shot about a hundred rounds at the range getting it zero'd and doing some random shooting.

I can put about a 5 inch group at 25yards with just the irons and around a 2 inch group with the dot, obviously the dot is more accurate....

http://i.imgur.com/C0VDvIb.jpg

That was a 3x5 index card at 25 yards, starting from high ready, 2 seconds 5 shots.

So it's pretty accurate, I doubt i'll ever carry it though.

[Gray222]

http://i.imgur.com/PTKPEl6.jpg

[Gray222]

http://i.imgur.com/QfpfdFD.jpg

[Gray222]

http://i.imgur.com/JEIe8YJ.jpg

[Gray222]

http://i.imgur.com/sVDJGef.jpg

[spinmove_]

How about a pic with a view through that RDS mount?

[Gray222]

How about a pic with a view through that RDS mount?

Not a bad idea. Later.

[Gray222]

http://i.imgur.com/MelOUZE.jpg

[CSW]

http://pic20.picturetrail.com/VOL1600/682422/22920671/411875040.jpg


G17 Gen 4.

[Gray222]

http://i.imgur.com/CsOasVx.jpg

[Gray222]

http://i.imgur.com/gTik074.jpg

[Gray222]

http://i.imgur.com/WyqPm2f.jpg

[Gray222]

http://i.imgur.com/3fNhoRy.jpg

[Gray222]

http://i.imgur.com/j9VVYNf.jpg

[willowofwisp]

some dead bird and 5Shot SME!
https://farm1.staticflickr.com/764/23536463205_2265839e99_z.jpg (https://flic.kr/p/BRQwvK)12301552_10153588164831141_5526950438157289 39_n (https://flic.kr/p/BRQwvK) by SiDave (https://www.flickr.com/photos/53409939@N06/), on Flickr

[LSP552]

4804

Poppa Bear, Mama Bear and Baby Bear.

[Gray222]

http://i.imgur.com/8mwLVoG.jpg

[Gray222]

http://i.imgur.com/CV70L20.jpg

[Gray222]

http://i.imgur.com/nXf9HHFh.jpg

[Gray222]

http://i.imgur.com/tNvRe5L.jpg

[Gray222]

http://i.imgur.com/GAN2iQT.jpg

[Gray222]

http://i.imgur.com/ASCqnfsh.jpg

[HCM]

http://i.imgur.com/ASCqnfsh.jpg

First thing I thought of when I saw this photo was the final scene in The Departed.

[Gray222]

First thing I thought of when I saw this photo was the final scene in The Departed.

I mean...they got it from somewhere right?

[spinmove_]

http://i.imgur.com/ASCqnfsh.jpg

That suppressor shot is just baffling.

[Gray222]

http://i.imgur.com/rYYzbVi.jpg

[HCM]

I mean...they got it from somewhere right?

Best Matt Damon scene ever.

[Gray222]

http://i.imgur.com/PKNwrKQ.jpg

Posted an install walk through of the RBU -> here (http://www.vdmsr.com/2015/12/dueck-defense-rbu-product-walkthrough.html)

[Gray222]

http://i.imgur.com/3qCcHGFh.jpg

[23JAZ]

http://i.imgur.com/3qCcHGFh.jpg
How's that red dot mount working out Voodoo?

[Gray222]

How's that red dot mount working out Voodoo?

So far so good, no zero walk, no issues otherwise that can be attributed to the RBU itself. I'm waiting to see how long the RM06 can stay on before it dies in "auto" mode.

[Gray222]

http://i.imgur.com/y62l9zN.jpg

[Gray222]

What's in your tool box?

http://i.imgur.com/GOqoRy0.jpg

[Gray222]

http://i.imgur.com/WXl23Gu.jpg

[Gray222]

http://i.imgur.com/NW7NhPf.jpg

[NickDrak]

Bored during an off-doodie gig.

5511

[JR1572]

Bored during an off-doodie gig.

5511

Is that Vulgar Display of Power?

JR1572

[NickDrak]

Is that Vulgar Display of Power?

JR1572

Fuck yes.

[JR1572]

Fuck yes.

Phil is a local boy. I've had a run in with Rex at work that didn't end well for him.

JR1572

[HCM]

Bored during an off-doodie gig.

5511

What slide is that ? complete or a custom job ?

[NickDrak]

What slide is that ? complete or a custom job ?

It's an Agency Arms "hybrid". I sent them my slide and they machined it.

[Gray222]

http://i.imgur.com/hFUJ4Oq.jpg

[El Cid]

Barrel got here. Now I have to sit patiently and wait for the stamp.

http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/Mobile%20Uploads/FullSizeRender_zpszxsmdnkn.jpg

[spinmove_]

Barrel got here. Now I have to sit patiently and wait for the stamp.

http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/Mobile%20Uploads/FullSizeRender_zpszxsmdnkn.jpg

How is the ejection on that setup? The positioning of that RDS seems like that would cause issues.

[Casey]

How is the ejection on that setup? The positioning of that RDS seems like that would cause issues.

When the slide moves to the rear while cycling, it appears as though the ejection port will clear the mount entirely.

[El Cid]

How is the ejection on that setup? The positioning of that RDS seems like that would cause issues.

Yep - the brass clears it without issue. It does leave some residue behind though.

http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/Mobile%20Uploads/IMG_2874_zpsvuf2z1lt.jpg

[Gray222]

Sort of want...

[spinmove_]

I'm kind of surprised that no one has devised a quick release mount for a pistol RDS yet. They all seem to have a permanent mounting solution that either leaves the iron sights completely useless or, if the RDS's glass gets cracked, renders co-witnessing moot.

[Gray222]

I'm kind of surprised that no one has devised a quick release mount for a pistol RDS yet. They all seem to have a permanent mounting solution that either leaves the iron sights completely useless or, if the RDS's glass gets cracked, renders co-witnessing moot.

There are a lot issues to overcome for a quick release or attachment system. Specifically since it may not hold zero properly. On top of all that, there are some good solutions out there that arent permanent, like the 6sec mount and the dueck defense rbu.

[El Cid]

Okay - photobucket was being its typical stupid self. Tried to get this uploaded hours ago.

http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/Mobile%20Uploads/G17%20RMR%20ALG_zpsu6waqbev.jpg

[Gray222]

http://i.imgur.com/QuSPhVa.jpg (http://www.vdmsr.com/2016/01/sometimes-you-get-interrupted.html)

[NickDrak]

Wasn't sure about the VG3, but I'm diggin' it so far....
5682

[Irelander]

That is a sweet setup, Nick. Nice pic.

[spinmove_]

Wasn't sure about the VG3, but I'm diggin' it so far....
5682

What sort of sights do you have co-witnessing with that RDS?

[NickDrak]

What sort of sights do you have co-witnessing with that RDS?

http://www.onesourcetactical.com/suppressor-sights.aspx#.Vqv3ruxOKnN

[glockmasterflex]

VooDooMan, I've never seen those clear see through mags before what brand are those?

[Gray222]

VooDooMan, I've never seen those clear see through mags before what brand are those?

ETS group

[glockmasterflex]

Cool thanks!

[Gray222]

http://i.imgur.com/8iLIFbG.jpg (http://www.vdmsr.com/2016/02/two-pistols-one-suppressor.html)

[Gray222]

http://i.imgur.com/JmNiZK4.jpg (http://www.vdmsr.com/2016/02/dueck-defense-fixed-rear-sight-fiber.html)

[spinmove_]

http://i.imgur.com/JmNiZK4.jpg (http://www.vdmsr.com/2016/02/dueck-defense-fixed-rear-sight-fiber.html)

Giving fiber a try, eh? I look forward to that review.

[Gray222]

Giving fiber a try, eh? I look forward to that review.

Yep. Even though I've been in the night sight big dot game for a while these are very much like the new defoor sights except fiber.

Plus trying new stuff is fun.

[cgcorrea]

http://i800.photobucket.com/albums/yy285/cgcorrea/Mobile%20Uploads/2016-02/8CA78D09-67D8-4A75-BA32-1B2741BF5C81_zpslgwc9xh3.jpg (http://s800.photobucket.com/user/cgcorrea/media/Mobile%20Uploads/2016-02/8CA78D09-67D8-4A75-BA32-1B2741BF5C81_zpslgwc9xh3.jpg.html)

[spinmove_]

I did this...

http://www.vdmsr.com/2015/08/ameriglo-defoor-night-sight.html

That seems like a match made in heaven. I'm assuming you moved away from that due to a lack of tritium in the rear or was it for some other reason?

[Gray222]

http://i.imgur.com/N8Hu3Im.jpg (http://www.vdmsr.com/2016/02/dueck-defense-fixed-rear-red-fiber.html#more)

[Gray222]

http://i.imgur.com/2mpb3UD.jpg (http://www.vdmsr.com/2016/02/viridian-x5l-gen2-update.html)

[Gray222]

http://i.imgur.com/HubsAcX.jpg (http://www.vdmsr.com/2016/02/edc_18.html)

[CS Tactical]

Freshly back from our Cerakoter we had the slide refinished from the factory FDE to Burnt Bronze.

https://scontent.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/1936273_1078350802207432_3218098340118669721_n.jpg ?oh=7605d8c0cc6eea7cc045705313ba5b46&oe=57248AFD

[Gray222]

Freshly back from our Cerakoter we had the slide refinished from the factory FDE to Burnt Bronze.

https://scontent.xx.fbcdn.net/hphotos-xat1/v/t1.0-9/1936273_1078350802207432_3218098340118669721_n.jpg ?oh=7605d8c0cc6eea7cc045705313ba5b46&oe=57248AFD

.....want

[M2CattleCo]

I saw an FDEG22 that has the slide done in Burnt Bronxe and it looked much better than the FDE that Lipseys used.

[Gray222]

http://i.imgur.com/Tg8MJk0.jpg (http://www.vdmsr.com/2016/02/jm-customs-aiwb-holster.html)

[Gray222]

http://i.imgur.com/S2lyaiT.jpg (http://www.vdmsr.com/2016/02/edc-gen4-g19.html)

[CS Tactical]

It shoots well for my personal skills, or lack there of...

5 rounds @25 yards standing unsupported 50/50/0x
I'm out of practice but pleased had to break in one of my carry guns after having the slide Cerakoted. Sellier and Bellot ammo is the most consistent practice ammo there is IME and I probably would have done better with a slightly lighter trigger. I'm going to experiment with a factory minus or Taran Tactical to try and get the trigger around 5 pounds.

http://i941.photobucket.com/albums/ad251/SShenaniguns/IMG_20160219_070147_zpsix1lr9mn.jpg
http://i941.photobucket.com/albums/ad251/SShenaniguns/20160218_184900_zps0iww0n5j.jpg

[Gray222]

http://i.imgur.com/S2YBRih.jpg (http://www.vdmsr.com/2016/03/dueck-defense-fiber-optic-front-sight.html)

[CSW]

http://pic20.picturetrail.com/VOL1600/682422/22920671/411881767.jpg

[ffhounddog]

http://i.imgur.com/S2YBRih.jpg (http://www.vdmsr.com/2016/03/dueck-defense-fiber-optic-front-sight.html)

Who makes the rear?

[HopetonBrown]

Who makes the rear?
Dueck Defense.

[Hizzie]

Looks like that 1/2 ghost ring sight Novak used to do.

[HCM]

Looks like that 1/2 ghost ring sight Novak used to do.

It's the camera focus. Per the website it's a conventional notch, .145 wide with a .115 FO front..

https://dueckdefense.com/shop/firearms/dueck-defense-fixed-rear-sight-fiber-optic-front-sight-for-glocks/

https://dueckdefense.com/shop/firearms/dueck-defense-fixed-rear-sight-for-glocks/

Here is a better view from their instagram:

6236

[Sero Sed Serio]

6353

I learned to shoot on a Gen. 2 Glock, and I've always been a big fan of them ever since. In late 2010, after years of searching, I managed to find an unfired Gen. 2 G17. Since then I've been searching for a NIB G19, but pretty much figured it was never going to happen, and if it did, there's no way it would be worth it given the scalper's prices that beater Gen. 2 G19s are going for on GunBroker.

On Wednesday I just happened across this on GB an hour after it posted. A guy out in Redondo Beach had been buying guns as investments, including this one, and it had just sat around for 20 years, and was never fired or carried. The buy it now price was only $25 over what a new Gen. 4 is going for locally, so how could I pass that up?

Just got it today--it's clear that it really never was fired. There was still some of the copper grease in it, although it was pretty dried up on the slide. Gave it a quick clean and lube, and looking forward to running it soon!

[El Cid]

Picked it up today. AAC Ti-Rant 9S. Had it Cerakoted in Smith's Brown. Hoping to shoot it tomorrow.

http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/Mobile%20Uploads/IMG_5815_zps4k9z0lln.jpg

http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/Mobile%20Uploads/IMG_5810_zpsv2ex4fsv.jpg

[Gray222]

http://i.imgur.com/o7abmNs.jpg (http://www.vdmsr.com/2016/03/magpul-gl9-glock-magazine.html)

[Gray222]

http://i.imgur.com/MTlumem.jpg (http://www.vdmsr.com/2016/03/on-draw.html)

[11B10]

http://i.imgur.com/MTlumem.jpg (http://www.vdmsr.com/2016/03/on-draw.html)



It's amazing how quickly Glocks with optics have become as common as they have. vdm - what are your thoughts on applications for "iron sights" today?

[Gray222]

It's amazing how quickly Glocks with optics have become as common as they have. vdm - what are your thoughts on applications for "iron sights" today?

I run and will continue to run iron sights all the time. I do not see it being law enforcement level mainstream for some time but I assume itll get there eventually.

It is a good option for those who want their pistol to do very specific things. Speed, however, is something that it still lacks.

[11B10]

I run and will continue to run iron sights all the time. I do not see it being law enforcement level mainstream for some time but I assume itll get there eventually.

It is a good option for those who want their pistol to do very specific things. Speed, however, is something that it still lacks.



As usual, thanks for the quick response - did you see my thread about "most unusual thing you've ever cut?" I'm going to try to post a picture of what I cut. With all your experience with things
edge-ed, thought for sure you'd have a story!


As I'm sure you can tell, I have zero experience with MOS (as in - I have never used them). IF you have the time, would you please explain why they "lack speed?" Thanks!

[Gray222]

As usual, thanks for the quick response - did you see my thread about "most unusual thing you've ever cut?" I'm going to try to post a picture of what I cut. With all your experience with things
edge-ed, thought for sure you'd have a story!


As I'm sure you can tell, I have zero experience with MOS (as in - I have never used them). IF you have the time, would you please explain why they "lack speed?" Thanks!

I think I posted about this before somewhere. Short answer is that when drawing and shooting very quickly, at least for me and others I train with, an RMR is very difficult to pick up on the draw. Unlike an iron sight, which can be picked up in your peripheral vision as you are presenting it forward.

[11B10]

I think I posted about this before somewhere. Short answer is that when drawing and shooting very quickly, at least for me and others I train with, an RMR is very difficult to pick up on the draw. Unlike an iron sight, which can be picked up in your peripheral vision as you are presenting it forward.


Wow! An answer in 28 minutes - thanks once again, vdm.

[bravo7]

I think I posted about this before somewhere. Short answer is that when drawing and shooting very quickly, at least for me and others I train with, an RMR is very difficult to pick up on the draw. Unlike an iron sight, which can be picked up in your peripheral vision as you are presenting it forward.

The irons don't have to be utilized as only a backup option, they can also aid in picking up the dot assuming there is a co-witness.

[Gray222]

The irons don't have to be utilized as only a backup option, they can also aid in picking up the dot assuming there is a co-witness.

I've played with that concept, except the irons are taller, which does not translate over well to the tens of thousands of reps I've done with normal height sights. As I've stated in other threads, it required me to do a lot more reps for a system I was not going to carry. My time is better spent on other things.

[Gray222]

http://i.imgur.com/AWOYOhq.jpg (http://www.vdmsr.com/2016/03/edc-gen4-g19.html)

[Gray222]

http://i.imgur.com/XJCBH9t.jpg (http://www.vdmsr.com/2016/03/taking-aim.html)

[ssb]

You seem to have gotten a bunch of use out of the ETS mags. Have you spent much time using the Magpul mags?

[Gray222]

You seem to have gotten a bunch of use out of the ETS mags. Have you spent much time using the Magpul mags?

Ran one in a class the other week...ive been running them both. I prefer the ets.

[spinmove_]

Ran one in a class the other week...ive been running them both. I prefer the ets.

Do you like them better from a reliability standpoint or something else?

[Gray222]

Do you like them better from a reliability standpoint or something else?

We did a lot of drill setups and that required downloading or loading mags, magpul worked fine it just required complete download.

The ets mags work the same and are only a few bucks more.

[Pennzoil]

6958
My old 26 and 2 pin 19 which both need a new set of night sights, again.

[Nephrology]

We did a lot of drill setups and that required downloading or loading mags, magpul worked fine it just required complete download.

The ets mags work the same and are only a few bucks more.

...huh?

[Gray222]

...huh?

....


Counting was easier with the ets mags as you could not see how many rounds were in the magpul mags.

[Palmguy]

http://i1259.photobucket.com/albums/ii551/PalmguyFL/DSC_9857-Edit-2_zpsfndi1dje.jpg

[Cool Breeze]

http://i1259.photobucket.com/albums/ii551/PalmguyFL/DSC_9857-Edit-2_zpsfndi1dje.jpg
Nice looking glock. Is that Grey or dark blue? Lipseys?

Sent from my SCH-I545 using Tapatalk

[Palmguy]

Nice looking glock. Is that Grey or dark blue? Lipseys?

Sent from my SCH-I545 using Tapatalk

Thanks. Yeah, It's a grey frame, I think from a Lipseys run.

[CSW]

New FDE Gen 4. Just picked it up last week.
6989

[El Cid]

All the available factory colors. Gray, Black, Dark Earth, OD, and Battlefield Green.

http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/Mobile%20Uploads/IMG_6671_zpsisi4mwvc.jpg

http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/Mobile%20Uploads/IMG_6672_zpsx51ptugv.jpg

[MD7305]

Very cool El Cid, I never knew of Battlefield Green guns but apparently they've been around for a while?

[El Cid]

Very cool El Cid, I never knew of Battlefield Green guns but apparently they've been around for a while?

Thanks! They came out sometime last year. Amchar is a distributor who did the run. I was planning to wait and see if Glock released a Gen 5 but got impatient and figured you can't have too many G17's right? Lol! They (BFG G17's) are also showing up in a certain federal agency's SWAT teams holsters as they replace the 1911.

[MD7305]

Thanks for the info, very interesting. I know the colored frame guns offer no advantage but I can't help but like and want them!

[11B10]

[QUOTE=Palmguy;427842]http://i1259.photobucket.com/albums/ii551/PalmguyFL/DSC_9857-Edit-2_zpsfndi1dje.jpg[/



Probably a real stupid question - is this your first G19? IOW, did you have a Gen2/3 previously - and, if you did, how would you rate them?

[SGT_Calle]

Thanks for the info, very interesting. I know the colored frame guns offer no advantage but I can't help but like and want them!

Indeed!
I really want a grey frame G19.

[ssb]

http://i.imgur.com/Zp7Gjrb.jpg

[Cool Breeze]

Thanks! They came out sometime last year. Amchar is a distributor who did the run. I was planning to wait and see if Glock released a Gen 5 but got impatient and figured you can't have too many G17's right? Lol! They (BFG G17's) are also showing up in a certain federal agency's SWAT teams holsters as they replace the 1911.
Damn those are gorgeous. Is the OD the same color as the original gen 3 ODs? I didn't know they made them! Looks great!

Sent from my SCH-I545 using Tapatalk

[Gray222]

http://i.imgur.com/8hfQ8JF.jpg (http://www.vdmsr.com/2016/04/safariland-iwb-mag-pouch-flexible.html#more)

[Gray222]

http://i.imgur.com/yuDFnnh.jpg (http://www.vdmsr.com/2016/04/angle-shot.html)

[Hizzie]

Dunno why I waited so long to try Gen4.

7204

[Gray222]

http://i.imgur.com/RySLZ2C.jpg (http://www.vdmsr.com/2016/04/sighting-in.html)

[Cool Breeze]

http://uploads.tapatalk-cdn.com/20160422/0c505f36b4975a9924c79cdb3e1563f4.jpgfound a desert tan glock in a gun store the other day.... Didn't know they made this color either!

Sent from my SCH-I545 using Tapatalk

[Gray222]

http://i.imgur.com/sioZSEY.jpg

[11B10]

http://i.imgur.com/sioZSEY.jpg


Vdm - just in case you (or anyone) may be interested, my local LGS has blue label Gen4 G19's for $398. It's killing me as my DD214 doesn't qualify me for a blue label buy.

[SpyderMan2k4]

Some of it's a Glock...
7430

[El Cid]

Damn those are gorgeous. Is the OD the same color as the original gen 3 ODs? I didn't know they made them! Looks great!

Sent from my SCH-I545 using Tapatalk
Thanks! I don't have an OD from the first run so I can't compare. Mine is from the second run that hit shelves around 2013 if I recall.



http://uploads.tapatalk-cdn.com/20160422/0c505f36b4975a9924c79cdb3e1563f4.jpgfound a desert tan glock in a gun store the other day.... Didn't know they made this color either!

Sent from my SCH-I545 using Tapatalk

"They" (Glock) didn't. That's an aftermarket finish.

Pic thread:

http://i828.photobucket.com/albums/zz209/El_CidAF_ResQ/Mobile%20Uploads/FullSizeRender_zpsdblvt5xa.jpg

[Gray222]

Vdm - just in case you (or anyone) may be interested, my local LGS has blue label Gen4 G19's for $398. It's killing me as my DD214 doesn't qualify me for a blue label buy.

Thanks for the heads up. That's about standard pricing so most places will sell that blue label.

[Luke]

Vdm - just in case you (or anyone) may be interested, my local LGS has blue label Gen4 G19's for $398. It's killing me as my DD214 doesn't qualify me for a blue label buy.

There's a guy on here selling a G19 with sights for $350 shipped. I've bought guns from him, he's a good dude. You might wanna jump on that! Check the classifieds!!

[Gray222]

http://i.imgur.com/EovycpT.jpg (http://www.vdmsr.com/2016/04/dueck-defense-rbu.html)

[Gray222]

http://i.imgur.com/0yYNE1B.jpg (http://www.vdmsr.com/2016/04/overkill.html)

[Hizzie]

T-CAPs

7556

7557

[Gray222]

http://i.imgur.com/ygnkcqo.jpg (http://www.vdmsr.com/2016/04/glock-grips.html)

[Gray222]

moar fde

http://i.imgur.com/3eq1lRZ.jpg (http://www.vdmsr.com/2016/04/glock-19s.html)

[spinmove_]

Clearly I don't have enough G19s in my life...

[Gray222]

Clearly I don't have enough G19s in my life...

Does anyone ever?

[ffhounddog]

I want or is it a need for a gen 4 19 still cugging along with 2 gen3s and a RTF2 G19. Thinking the gen4 26 would comer that parts the G19 doesn't.

[Gray222]

http://i.imgur.com/XDhQoUJ.jpg (http://www.vdmsr.com/2016/05/retention.html)

[SD]

7701 Liked the 17 set up so much that I piciked up a 34. Anyone use a ALG mount with an RMR, thinking that may be the direction i dress this one out. But i do love the T-1 on the 17.

[martin_j001]

^^Been considering trying one of those on my 34, maybe trying my hand at GADPA's open division, and maybe some USPSA too...

[GlockGen4]

MY BABIES!

[Bigghoss]

https://scontent.fsnc1-1.fna.fbcdn.net/v/t1.0-9/11401561_10153249409250219_3152680787401271991_n.j pg?oh=dae5b4314a8fba69b9698c37b8a6454e&oe=57AADC7F

Merry fucking Christmas

https://scontent.fsnc1-1.fna.fbcdn.net/v/t1.0-9/10410223_10152798334585219_35008307782828825_n.jpg ?oh=16eca252d370d93dd2f44142cb1a57dc&oe=57DE749A

[Gray222]

http://i.imgur.com/y5KIzXy.jpg (http://www.vdmsr.com/2016/05/options.html)

[Hizzie]

Giving the T Rex Arms Sidecar a try.

7973

[breakingtime91]

Hizzie, are you using the wing that helps tuck it in?

[Hizzie]

Hizzie, are you using the wing that helps tuck it in?

Yeah. Thinking about yanking it though. Mag prints a touch.

[Irelander]

Yeah. Thinking about yanking it though. Mag prints a touch.

I've been interested in the Sidecar but haven't got one yet since there isn't a ton of quality reviews on them.

Are you using any type of foam wedge near the muzzle to tip things closer to your body or do you think it doesn't need it?

Do you think if the mag sat lower in the holster it would conceal better? Looks like it sits really high.

[Gray222]

I've been interested in the Sidecar but haven't got one yet since there isn't a ton of quality reviews on them.

Are you using any type of foam wedge near the muzzle to tip things closer to your body or do you think it doesn't need it?

Do you think if the mag sat lower in the holster it would conceal better? Looks like it sits really high.

Don't waste your money.

[JCS]

I've been interested in the Sidecar but haven't got one yet since there isn't a ton of quality reviews on them.

Are you using any type of foam wedge near the muzzle to tip things closer to your body or do you think it doesn't need it?

Do you think if the mag sat lower in the holster it would conceal better? Looks like it sits really high.

I recently bought one and plan on doing a review. I had to send it back because of an issue with it. I only got to try it for a day or two so far. Their customer service is interesting to say the least. I can definitely say that it doesn't conceal well. My other holsters are a shaggy and jm custom.

There aren't any quality reviews out there. It's huge on Instagram so I bought one to find out if it's good gear or not. I'll post a review in a month or so once I get carry time with it.

[JCS]

Don't waste your money.

Curious why you say that?

[Irelander]

Yeah their website has lots of pics of the owner concealing a Glock in a Sidecar wearing only a snug t-shirt and doing all sorts of maneuvers. He's a pretty skinny guy though, maybe the Sidecar fits well in the space between his hip bones. The Sidecar concept always sounded like a good idea to me but the price and lack of reviews have made me hesitate. On a whim I inquired with T-Rex about getting a loaner Sidecar to try before I bought one but they said they didn't have one available because they were struggling to keep up with demand. Figured it was worth a shot.

firefighterguy,
I'd definitely be interested in your review. Is it the gun, the mag, or the whole package that doesn't conceal well for you?


FYI...Knowledge Skills Gear makes one called the Velox.

[Gray222]

Curious why you say that?

There is just a lot of issues with it.

Faulty premise (double handed "I give up position" draw stroke), based on square range bullshit and not real life requirements. Concealability is VERY suspect. Those clips? Yeah, no.

A buddy of mine bought one just to try it out, his summary of experience was "if you take a two pack of steaks and duct tape them to the front of your stomach, IWB, that's basically what it feels like all the time."


I'd almost want to try one just to show on video how horrible the design is.

[Hizzie]

I got it to try the concept. I wanna glue a piece of 1/8" poron to the back for comfort. I still have my VG3 and Phlster. Too bad my PerSec SPEAR won't be here in time for The Yeti's class.

[JCS]

Yeah their website has lots of pics of the owner concealing a Glock in a Sidecar wearing only a snug t-shirt and doing all sorts of maneuvers. He's a pretty skinny guy though, maybe the Sidecar fits well in the space between his hip bones. The Sidecar concept always sounded like a good idea to me but the price and lack of reviews have made me hesitate. On a whim I inquired with T-Rex about getting a loaner Sidecar to try before I bought one but they said they didn't have one available because they were struggling to keep up with demand. Figured it was worth a shot.

firefighterguy,
I'd definitely be interested in your review. Is it the gun, the mag, or the whole package that doesn't conceal well for you?


FYI...Knowledge Skills Gear makes one called the Velox.

I don't want to comment on it too much because my time wearing it is under ten hrs because I had to send it back. But when I wore it with a gun belt it literally looked like I stuffed a text book in my pants. I wore a very loose floppy belt and it helped a lot. The clip placement directly on the magazine seems to be a poor design. It prints horribly. But give me some time to play with it and I may be able to correct it. The holster is all about speed. So you are going to sacrifice concealability and i knew that.

[Gray222]

I don't want to comment on it too much because my time wearing it is under ten hrs because I had to send it back. But when I wore it with a gun belt it literally looked like I stuffed a text book in my pants. I wore a very loose floppy belt and it helped a lot. The clip placement directly on the magazine seems to be a poor design. It prints horribly. But give me some time to play with it and I may be able to correct it. The holster is all about speed. So you are going to sacrifice concealability and i knew that.

What if I told you that you don't have to sacrifice speed for concealment?

[orionz06]

I got it to try the concept. I wanna glue a piece of 1/8" poron to the back for comfort. I still have my VG3 and Phlster. Too bad my PerSec SPEAR won't be here in time for The Yeti's class.

When?

[HCM]

What if I told you that you don't have to sacrifice speed for concealment?

You can't post something like this in a pic thread without a Morpheus Meme.

7995

[Gray222]

You can't post something like this in a pic thread without a Morpheus Meme.

7995

Yeah that guy