this would appear to be the new model, yes?
https://grabagun.com/beretta-1301-ta...ng-sights.html
this would appear to be the new model, yes?
https://grabagun.com/beretta-1301-ta...ng-sights.html
Does the above offend? If you have paid to be here, you can click here to put it in context.
I have been putting my accessories on my 1301 LTT. I had an older SF M300 that I hoped would fit behind the muzzle. The LTT did not come with the Nordic clamp rail attachment, so I ordered it from Arnszen Arms. Really fast turn around.
In order to keep the bezel behind the muzzle, I had to move the barrel clamp back onto the bigger OD part up against the magazine nut. Me being anal, I measured the step in the extension tube and its .015" larger in diameter. I had a Diet Coke can laying around and 3 pieces was approximately .015" thick.
I wish it was tighter to the barrel.
you can see the Diet Coke can shims
I used a larger Tnut and flattened the points. I made a custom kydex filler of the slot and drilled a hole to limit any movement of the Tnut.
I angled cut a rubber washer but the Match Saverz still squared up when I tightened it up. It works just wanted more angle toward the ejection port.
I think the threaded portion of the Tnut needs to be shortened.
If you're going to be a bear….be a GRIZZLY!
Stopped by the local gun store and they actually had a mossberg SGA in stock. I've been putting off buying one for whatever reason, but having it right in front of me I couldn't pass it up.
Just got it installed. What a huge difference in comfort, grip, and stance. Honestly after shooting various shotguns with normal hunting stocks for all my life... this is like the perfect marriage of utlity and pointability for me. It can point like a hunter but is comfortable almost like a carbine.
Nothing you haven't seen before, but here is a 1301 gen 2 with nordic extension, aridus qdc, aridus adapter, and SGA.
Last edited by Cory; 09-28-2021 at 01:28 PM.
Edit: all sold out :-(
BIG TEX IS HAVING ANOTHER ARIDUS DROP.
RMR CROM is already sold out in both SKUs, both Aimpoint SKUs still in limited stock: https://www.bigtexordnance.com/produ...ic-mount-crom/ (12 Standard, 6 Haught Aimpoints showing in stock at this moment)
Handguards also both in limited stock: https://www.bigtexordnance.com/produ...uard-assembly/ (black is now OOS, still ~16 FDE showing)
Last edited by Clusterfrack; 09-28-2021 at 07:27 PM.
Email from Big Tex Ordinance that Aridus handguards are back in stock. Get them while you can.
Sent from my iPhone using Tapatalk