Here's a bit of a look at the DR920P. It does appear to be using a G19 top end/recoil spring assembly.
Sent from my SM-G970U using Tapatalk
Here's a bit of a look at the DR920P. It does appear to be using a G19 top end/recoil spring assembly.
Sent from my SM-G970U using Tapatalk
Something I just noticed in my XR920 frame is a coil spring under the slide lock. My DR and MR both have the L-shaped spring as used from Gen 1-4.
I wonder if this is unique to the XR or has it become standard now across the frame models.
Sent from my SM-G970U using Tapatalk
I wasn't sure if I should post this in the MR or the DR thread, but since it is about the crossovers I guess it could go either way. Lol.
If I am reading things correctly, I can buy an XR920 and an MR920L then mix and match, creating combos equal to 19,19L,45, and 17. Is that correct?
Yes. That sums it up.Originally Posted by cornstalker
Sent from my SM-G970U using Tapatalk
Just because it is Saturday.
Sent from my SM-G970U using Tapatalk
DR920 or MR920L slide. XR920 frame. The "1911 overhang" would be the same with an MR920 frame.
Sent from my SM-G970U using Tapatalk
@Tokarev
I didn't go back through the whole thread. Do the DR920 and MR920L use a G19 length recoil system? If so, how is the recoil pulse/sight tracking compared to a G17?
I picked up an XR920 Combat this week and look forward to completing the set.
I think the G19 recoil spring across the lines to include the compensated model. Not sure about the CR920.
I'm not sure how the shorter vs longer slides track. I'm don't seem to be super sensitive in this regard. But maybe one of these days I'll set up a few timed/scored drills and see if 1 gun scores out better than the other.
Sent from my SM-G970U using Tapatalk
How good is the accuracy at 25 yards or more?
Accuracy for me has been good
With a red dot not an issue shootings 90+ on a b8 @ 25
It is me screwing up whenever I don't and at worst it is 84+
Reply With Quote
