Originally Posted by
EricM
The slide attaches with the same pins as the factory slide and provides access to POI adjustment screws and switches. The rear weight needs to be removed from the frame to make room for the sight (it is just glued in and will come free with pliers or vise grips). The slide would come with tall black polymer sights, but is also compatible with any front and rear Glock sights if you want tritium or a high-vis front. The red dot is secured with two hex screws into metal inserts. Made in house, 3D printed in nylon.
Thank you! Yeah both of those sights would be good choices. My recollection is the plug connecting the wires to the trigger module was the limiting factor on how low the sight could be mounted, but there was just enough room to match the standard milling depth. For basic dry fire you probably could get away with double sided tape (as long as the battery was top-loading), but some folks also use SIRTs for things like force-on-force training, so I was glad to be able to include a robust mount.