JM Custom Kydex AIWB holster review

[mrozowjj]

If you go to my site, Quick Ship Glock holsters, Wing Claw 2.5, the main picture (coyote holster with a 19) is the fixed soft loops. Thanks

Thank you. I put the order in this afternoon. Went with the Claw 2.5 and ordered 3 different clips for it so I can give them all a go.

[JSGlock34]

Which JMCK AIWB holster offers the highest ride? I've tried a George with the split loop, but still manage to scrape my knuckles on the belt with a Brigadier Tactical.

[Tony Mayer]

Which JMCK AIWB holster offers the highest ride? I've tried a George with the split loop, but still manage to scrape my knuckles on the belt with a Brigadier Tactical.

JSGlock34, did you move the loop to the lower holes (higher ride height)? Also if you have a split loop it will have a figure eight hole pattern so it can be moved to ride higher as well.

For claw designs, the 2.5 w/ DCC clips will have the highest ride height.

Thanks

[HCountyGuy]

JSGlock34, did you move the loop to the lower holes (higher ride height)? Also if you have a split loop it will have a figure eight hole pattern so it can be moved to ride higher as well.

For claw designs, the 2.5 w/ DCC clips will have the highest ride height.

Thanks

By chance have you ever thought about producing a holster with higher standard right height? That might be my only gripe with your stuff these days is even on the highest ride-height I still sometimes wind up scraping my belt. It’s certainly frequent with my current WC 2.0 using DCC clips.

By the way, other than the ride height issue, the WC 2.0 with DCC clips is the most stable holster I’ve used yet. I’ve used a regular AIWB with split-loop and thought it was stable but this thing does not budge an inch from how I position it. Very happy with it!

[JSGlock34]

JSGlock34, did you move the loop to the lower holes (higher ride height)? Also if you have a split loop it will have a figure eight hole pattern so it can be moved to ride higher as well.

Yes, I used the lower holes along with the split loop to maximize the ride height.

Is it possible to drill additional rows of mounting holes to the holster body?

[Tony Mayer]

Yes, I used the lower holes along with the split loop to maximize the ride height.

Is it possible to drill additional rows of mounting holes to the holster body?

Yes, we can drill additional holes, won't be a quick ship though. Thanks

[Tony Mayer]

By chance have you ever thought about producing a holster with higher standard right height? That might be my only gripe with your stuff these days is even on the highest ride-height I still sometimes wind up scraping my belt. It’s certainly frequent with my current WC 2.0 using DCC clips.

By the way, other than the ride height issue, the WC 2.0 with DCC clips is the most stable holster I’ve used yet. I’ve used a regular AIWB with split-loop and thought it was stable but this thing does not budge an inch from how I position it. Very happy with it!

Not as quick ship holsters, but for a custom holster we can more than likely do that. Thanks

[JSGlock34]

Yes, we can drill additional holes, won't be a quick ship though. Thanks

Sounds good - I'll place an order. (ETA: Order placed!)

[Chuck Whitlock]

By chance have you ever thought about producing a holster with higher standard right height? That might be my only gripe with your stuff these days is even on the highest ride-height I still sometimes wind up scraping my belt. It’s certainly frequent with my current WC 2.0 using DCC clips.

By the way, other than the ride height issue, the WC 2.0 with DCC clips is the most stable holster I’ve used yet. I’ve used a regular AIWB with split-loop and thought it was stable but this thing does not budge an inch from how I position it. Very happy with it!

I'm not sure which clips the holster ships with, but maybe you could switch them out with shorter clips?

https://www.discreetcarryconcepts.co...4%A2-c26960683

[HCountyGuy]

I'm not sure which clips the holster ships with, but maybe you could switch them out with shorter clips?

https://www.discreetcarryconcepts.co...4%A2-c26960683

Thank you very much for that! I will be looking to see what may work for me. Tony posted on the previous page that he utilized Mod 4 Universal Height variants, so I’ll see if I find something that might work better for me.

Truly appreciate the suggestion!