I've been lurking here a while but this is my first post on this site. I hope y'all find it useful.
After reading ToddG's AIWB thread on the m4 site I was glad to find the discussion continued over here.
This thread has done a great job fleshing out the growing number of holster options for AIWB. However, I share in the frustration that many have expressed regarding "What is right for me?".... Will I prefer a deeper concealment AIWB, or do I have the right body proportions to comfortably use a combat grip ride height? How does MY weapon of choice change the recommendations from someone who is using the holster I'm considering, if they are putting a different weapon in it? Do I prefer a neutral cant or will a slight reverse cant or cross-draw conceal better or be more comfortable on a long drive? ...... And so on...
What we all wind up with is a lot of waiting around for expensive holsters that don't turn out to be as perfect as we had hoped. What I'm hoping to add here is my recommendation on a highly adjustable holster that has allowed me to answer a lot of these questions for myself, hands on, quickly. I'll be up front and say that this holster has a few shortcomings for AIWB. I'll explain some of those later. But, what this holster has allowed me to do is experiment with a very wide variety of carry positions, from 5-o’clock to cross-draw, and test a variety of ride heights, using one holster.
Please note that I have no affiliation with the maker of this holster other than being a one-time customer.
The holster is made by a guy named Rocky at Pure Kustom Holsters http://www.purekustomholsters.com/ .
Service from Rocky was “ok”. I was told 6 weeks when I ordered, but it took about twice that.
His communication was good, so I didn't get too upset at the delay. “Ok”.
The model name is "Special Ops". Weapon is a H&K P2000SK. Here are a few photos...
Overall, it's a great holster. Well-made, great quality, boning is good, retention is solid, materials and finish seem top-notch. The holster carries well and is easy to conceal strong side, as any good IWB holster should be.
Where it really shines, however, is adjustablility. As you can see from the photos above, on each side of the holster body are 3 holes. The photo below shows the additional holes in the tuckable belt loops. The combination of these holes give you a wide choice of height and cant. I'm able to cant this holster from FBI to muzzle forward. I can raise the ride height from deep concealment to my rib cage. (I'm 5'8 [173cm], 180# [81.5Kg], 33-34” [85cm] waist size). I've been able to experiment with different positions and cants from 5-o'clock to cross-draw, using just one holster. I can make small changes, try it, then quickly change it again.
I still find AIWB to be the best for me, but now I also know that I prefer a straight drop with the ride height raised just to the point where a combat grip is accessible. I thought a slight forward cant would be good for me, but, if I cant it forward I either lose access to the combat grip or I have to raise the ride height to compensate and the slide starts poking me in the bottom of my rib cage. I feel like I've saved at least 5 holsters, 2 years of wait time and tons of frustration having instant adjustments with the turn of a few Chicago screws.
Here's the results …. for me..
1. I have a very nice IWB holster.
2. Move a few screws and I have a solid AIWB holster. Not perfect, but solid.
This is what I was wearing yesterday, but this rig conceals just as easily for me under a t-shirt. You can see that the butt is pulled in reasonably well, the sweat shield is also firmly against my skin/shirt.
So now that I've discovered what cant and ride height fits me and this particular weapon, the next question is, “Is this a full-time AIWB rig?”.... and my answer is... “Maybe.”
For AIWB this holster has two (and a half) noticeable shortcomings.
1. As you can see in the top photos, the bottom of the holster has a fairly square profile. The amount of leather under the grip side of the trigger guard could be enough to poke you in the groin constantly. Clearly the shape of the leather in this area could stand to be contoured more for better AIWB comfort. FOR ME, it's not a problem. I found that it was poking at me to the side (grip side) and not down towards the groin. I didn't have a problem sitting comfortably, even with the ride height lowered another notch. This observation is, of course, VERY height/proportion/dress/choice-of-weapon dependent. I did have to massage the leather (just in this area) to straighten the curved profile of the holster a bit. After I flattened it a bit, it's now all-day comfortable, even though an “AIWB cut” would probably be even better. If I was shorter, or if I wanted a very low ride height, getting poked in the groin might be a problem. Hopefully you get all the nuances here.?
2. I really like the stability provided by the well spaced belt loops. However, for AIWB, this distance might limit the placement of the holster. As you can see in the photos above, the belt loop nearest my mid-line is pressing up against my belt buckle. If you wear a belt with a large buckle, trouble. If you prefer to carry closer to the mid-line, you would need to buckle your belt on the side. A web belt would give you some additional room. This is all “no problem” for experimenting, but for a dedicated AIWB, it might be an issue for you. For me, the loop spacing positions the weapon exactly where I want it. Lucky me.
2.5 I really prefer snap loops to having to remove my belt.
So what will “I” do? At the moment, I'm “happy but looking”. I've been able to clearly identify what I want in a dedicated AIWB holster, I've crossed a bunch of holsters off my list, and I'm content to shop around until I find something that exactly fits the bill. When I do find a dedicated AIWB holster to order, I plan to send this one to the maker and ask them to match the ride height.
I would NOT buy this holster as a dedicated AIWB rig unless the maker was willing/able to contour the bottom corner of the holster for a more AIWB-friendly fit. But it's great as-is for strong side IWB, it works pretty well for me for AIWB and the adjustibility makes it a great choice if you're still trying to figure out how exactly you prefer to carry. If you like the adjustibility and you're inclined to try and work with the maker, I'd assume he would custom-shape an AIWB version for you to deal with issue #1. Issue #2 is really a feature of the holster and would be difficult to change.
Thanks again to everyone that's contributed to this thread. It's been very helpful.