He claims he wasn't a troll. You bumped back up a thread that was on its way to die and is now back semi alive. Our troll to member ratio is still a billion times better than ANYWHERE online. We still have it good guys. Don't let 1 semi confused possible troll ruin your Cheerios! I <3 this forum.
Here is the story on that pistol, from my perspective.
1. Jason Burton is one of the top 2 actual, practicing, does his own work 1911 gunsmiths out there.
2. That gun, because it used a Caspian frame, contained (figuratively) a bag full of fleas. Jason did yeomen's work in getting it to run right. This gun had a barrel bed cut in the wrong location. Jason moved mountains to make it work. This exasperated a feeding issue caused by the mag well being way too long for the 9x19 cartridge. Thus pushing the feeding mechanism outside the reliable operation window.
3. When dealing with guns of this ilk (that is, of the highest standard), it is quite common for it to round trip to the maker for fine tuning. These are art work, and that gun was truly nice. It is not a $7500 gun feeding issues.
What Jason did with that gun was akin to what the old school guys like Boland did - taking something way out of wack and making it run right by talent and a bucket full of hard work.
I have never seen a completed Burton gun that didn't run perfectly. I have seen people with more money than experience scratching their head as to why their 1911 with a match barrel and match chamber didn't feed right with uber cheap reman ammo without a taper crimp. YMMV.
My (brief) return was to set the story straight on this - Jason is an amazing 1911 pistolsmith. That gun is typical Jason. Caspian and I did not live up to the standard the Heirloom did and still does. I would, and am, plunk down hard earned cash for a H-P/JB gun.
How about that - a post on a gun form that didn't contain insults!
Cheers all!
Bill
OK, what brand of parts would you send for a nice job that wouldn't require extreme measures?
Depends. For example, Wilson makes parts to fit Wilson slides/frames.
Other parts companies make parts to fit generically. Lots of "parts companies" use one particular company run by a top notch gunsmith that no longer builds guns. And most of those parts are designed to fit Colt. Then there is SA, which is built off metric prints.
Colt doesn't equal SA doesn't equal WC doesn't equal Norinco.
If I were spending my $$$ I'd but a Wilson Super Grade or a JB with whatever he wanted.
I was talking about the big parts, like the Caspian frame that you said was hard to work on.
And I guess that is insider secret knowledge.Lots of "parts companies" use one particular company run by a top notch gunsmith that no longer builds guns.
But it seems a lot of gunsmiths find parts to be a steadier business than working on one gun at a time.
There is one gunsmith, who is absolutely batshit crazy about the difficulty of working on "metric Springfields." Seems to me that the file and stone take care of any rounding errors.Then there is SA, which is built off metric prints.