@Texaspoff can probably do it for you.Originally Posted by officer960
Sent from my SM-S901U using Tapatalk
@Texaspoff can probably do it for you.
Sent from my SM-S901U using Tapatalk
Here's a MAC that's been worked over by Monsoon Tactical. I wonder why he didn't use taller sights while he was doing the work.
Sent from my SM-S901U using Tapatalk
Updates with shooting log:
So I had 4 FTE on my first range trip. On May 14th, I had 4 failures to feed, but found out that I reassembled my Atlas mag with the spring backward after cleaning (DOH!) so I can't attribute that to the gun.
The original extractor was a little loose in the channel and FPS was loose in the slide. I fit Harrison Custom parts and they lock together like a vault. The ejection and extraction was MUCH better and it passed the 10-8 test with flying colors. I think the FPS is the critical upstream piece that needs be looked at when you get a new gun or replace an extractor on these Turkish guns.
I got a full size FPS and ended up filing 1/8" off the top to accommodate the RDS cut. I think a Bomar height FPS may work but I didn't want to run the risk of that being too short, so "custom fit" it is. The process didn't add a significant amount of time to the whole ordeal so I think it was worth it.
If you're not going to learn to use the front sight properly, don't bother with it. If pointing the gun, screaming "Ahhhhh!" and cranking on the trigger is all you can learn to do, work on doing that safely. -ToddG
Turkatto. That’s funny right there!
Sorry about the previous double post - assumed it was in internet issue, but turns out my posts need to be reviewed as a newb.
Anyway, I got a Prodigy grip module, MSH, mag catch, mag catch spring, mag catch lock and it works perfectly. I did have to slightly modify an X300U to lock on the 1913 rail. Ordered a EGW Prodigy magwell that I'm waiting on.
Should have the Atlas springs and guide rod soon.
@Tokarev that Monsoon Tactical gun is chef's kiss. I bought this "Turkatto" to mess with since I don't want to void the warranties on my Staccato's (XC, P, C2). May just send it off and I can always put the Prodigy grip module on my Nightstalker.
Updates with shooting log:
So I had 4 FTE on my first range trip. On May 14th, I had 4 failures to feed, but found out that I reassembled my Atlas mag with the spring backward after cleaning (DOH!) so I can't attribute that to the gun.
The original extractor was a little loose in the channel and FPS was loose in the slide. I fit Harrison Custom parts and they lock together like a vault. The ejection and extraction was MUCH better and it passed the 10-8 test with flying colors. I think the FPS is the critical upstream piece that needs be looked at when you get a new gun or replace an extractor on these Turkish guns.
I got a full size FPS and ended up filing 1/8" off the top to accommodate the RDS cut. I think a Bomar height FPS may work but I didn't want to run the risk of that being too short, so "custom fit" it is. The process didn't add a significant amount of time to the whole ordeal so I think it was worth it.
This.
We may lose and we may win, but we will never be here again.......
3700 rounds. Nothing to report, other than I seem to be shooting this slightly better than the Prodigy, which is my main squeeze.
Also- my brother just received a Mac, and it seems to be slightly improved. It came with a short MSH Pin so you can run it without the magwell, and correct height co-witness sights. Maybe this is a soft second generation gun. That's cool!
If you're not going to learn to use the front sight properly, don't bother with it. If pointing the gun, screaming "Ahhhhh!" and cranking on the trigger is all you can learn to do, work on doing that safely. -ToddG
Hey, did you ever get the Atlas Guide Rod?
If you're not going to learn to use the front sight properly, don't bother with it. If pointing the gun, screaming "Ahhhhh!" and cranking on the trigger is all you can learn to do, work on doing that safely. -ToddG
This means, I assume, that there's also a taller rear sight on the RMR plate? Is SDS still shipping these with the sixteen pound spring or whatever it is?
Last edited by Tokarev; 06-06-2024 at 03:40 PM.
I did - and it works perfectly with the MAC plunger and Atlas 12# recoil spring. Don't get the Atlas plunger, it's not compatible according to everything I've read.
I saw those "version 1.5" iron sights on a newer M9DS and wonder if us early adopters can get an upgrade from SDS?
Reply With Quote
