If you're using 10 round G17 magazines, DEFINITELY use the orange-followered Gen5 magazines; otherwise, for the 17 rounders, you're fine with the earlier generation G17 magazines.
Best, Jon
If you're using 10 round G17 magazines, DEFINITELY use the orange-followered Gen5 magazines; otherwise, for the 17 rounders, you're fine with the earlier generation G17 magazines.
Best, Jon
Sponsored by Check-Mate Industries and BH Spring Solutions
Certified Glock Armorer
I’ve never tried the GEN five ejector in a GEN three.
My understanding is the housings for Gen 1-3 are different than for Gen 4/5 due to the reduced size of the Gen 4/5 grip.
It’s pretty easy to pull the ejector itself out of the housing and swap it to the appropriate housing.
Another component I've used for improving extraction and can recommend is the White Sound H.R.E.D. I've used it on several problematic Gen3 guns that had particularly weak and inconsistent extraction and noticed a definite improvement. Not necessarily the first component I'd go to when diagnosing these issues but, if checking off the boxes and trying to improve the problem, it's certainly an option worth considering.
Administrator for PatRogers.org
Had a chance to shoot around 200 rounds today:
I cleaned the pistol prior to today’s session.
I used mostly Magtech 124’s, the rest Speer Lawman 124’s, except for two mags of Ranger 124gr +P JHP’s.
I used Glock mags except for a couple of times using Pmags.
No stovepipes while shooting the pistol w mags inserted.
One stovepipe occurred during the only time I shot the pistol without a mag! Didn’t bother trying to reproduce it since I’m pretty sure that Glocks don’t like being shot without a mag.
Going back to using mags produced no stovepipes.
I video taped myself doing doubles with splits down too .16, .17s, and the ejection seemed pretty good.. somewhat surprisingly the ejection seemed fairly energetic toward the 3 - 5 o’clock.
When my 11 yo son shot the pistol the ejection was mostly 5 to 5:30, but with some going out at the 6 o’clock, right over his head.
I did note a few brass strike marks on the right upper corner of the front of the optic housing when I inspected it later. I didn’t appreciate any marks on the glass.
I can upload the videos of me doing doubles w all three different types of ammo on YouTube if anyone is interested.
I’m getting some Gen 5 ejectors soon so I’ll report back with an ejection comparison.
For now, it seems like we can mark this one case closed.
Likes pretty much everything in every caliber.
Yeah, I think it was the gun wearing in after the refinish with the tighter aftermarket barrel, possibly compounded by using Pmags.
What I forgot to mention is that, I assumed that the worse looking ejection pattern seen when my son was shooting the pistol was due to a weaker grip, but I just realized that he was also using a PMAG.
Just for kicks I may video myself shooting, using OEM vs PMAG and see if there’s a difference!
I want to thank you all for the super insightful and informative comments. This place is still the best place on the net for great information.
Quick Update:
Successful experiment.
I installed a Gen 5 47021 ejector in my Gen 3.
I ran around 150 rounds and it functioned perfectly, with the center of the brass pile 4-5 feet away at around 3:30 o’clock.
Just my 2 cents, but the Gen5 ejection is a huge improvement. If you’re going to spend a lot of time/ammo/effort in fixing an okder gun, consider just upgrading to a gen5.