Beretta 1301 Tactical

[mmc45414]

Attachment 117655

Is that the Rusty Nutz MRO mount? Does it co-witness?

[Pnut]

Yes, lower 1/3 co-witness!

[CEBEP]

Looked through their website and it is a hot mess. It appears to be machine translated, poorly done. At one point a part description veered off into a AI essay on gun ownership in America.

It makes me hesitant to order very expensive parts from such an odd source.

I would be interested to hear from anyone if they had a good business experience with them.

I ordered hand guard forend for my M4 and am pleased with it. Stock aluminum of my M4 T Pro is 323gr. Stock polymer forend on M4 is 144gr. Toni system polymer forend with aluminum mlok inserts is 92gr. And very comfy one. It’s what Toni System do, they mainly do parts for competition shooters which is why they design them as light as they can. That’s probably why people say plastic feels cheap and hollow. Same goes for their stocks for M4, design aside it’s lighter than stock.

[ricky_bobby]

Big shout out to @Centerfire for all his help

LPA steel rear sight with Tacord half moon Rob Haught aperture, and Tacord 509T mini mount for absolute cowitness
Holosun HE509T (green) using donut only it picks up fast and after trying regular ghost ring it’s amazing how much picker the eyes pick up target using half moon - going to add an Mlok QD on the handguard and she’s pretty much all set!

[Centerfire]

Big shout out to @Centerfire for all his help

LPA steel rear sight with Tacord half moon Rob Haught aperture, and Tacord 509T mini mount for absolute cowitness
Holosun HE509T (green) using donut only it picks up fast and after trying regular ghost ring it’s amazing how much picker the eyes pick up target using half moon - going to add an Mlok QD on the handguard and she’s pretty much all set!

I'm glad it worked out, it's a great configuration.

I used the IWC cup for the old hardware. May as well just use a Magpul MLok qd on the cheap now that the entire rear slot is free.

[ricky_bobby]

I'm glad it worked out, it's a great configuration.

I used the IWC cup for the old hardware. May as well just use a Magpul MLok qd on the cheap now that the entire rear slot is free.

That was exactly the plan - I use Magpul's MLok QD on all my AR's and why I was excited to update the Zhukov handguard on 1301T as it would allow me to use one on this-

[destruya]

So, a valuable, if a little pricey lesson learned...

When Beretta/MGW sell you a barrel, apparently they just sell you the barrel, NOT the shit inside that makes it work. THANKFULLY I was only testing one shell at a time with my new Salvo 12:

https://i.imgur.com/Vo1PqbU.jpeg

Seems I need the following parts to complete the barrel to OEM specs, one of which I *cannot* find stateside, so if anyone in here has a connection I'd be eternally grateful.

C5A038: I have a lot of spares of these courtesy of McMaster-Carr (have)
C5A039: Beretta 391 Xtrema 1 & 2, Gas Piston (unavailable save for one store, and the only company on Google with one in stock is in Canada and won't ship gun parts internationally)
C5A040: A400 Xtreme/1301 Tactical 5-Piston Snap Ring (ordered)
C5F172: 1301 Tactical Forend Bushing Spacer (ordered)
C8A961: Beretta 1301 Tac Piston Assy (unavailable seemingly anywhere)

Oh, and my moderate stupidity also cost me my stock forend and I'm not enough of a dick to put in a warranty service request for a new one so I'm just BUYING a new OEM forend.

[Maximus7]

Made the upgrade to the Aridus V2 Handguard. Excellent timing since they were in stock & my broken tabs on OEM handguard seemed to happen simultaneously

[TCinVA]

The new adapter is pretty frickin' sweet:



...and the texturing on the Zhukov itself is pretty choice, too. It's grippy but not so sand-paper-eqsque as to mess your hands up too badly on long training days.

[mrozowjj]

Anyone know what the LOP is on the factory stock that comes in teh 1301 Tactical Mod 2?

Or what the LOP is on the Magpul stock?