I'm sure it's me, but, JM terminology confuses me without pics or links...
"JM AIWB 2.0 with split overhook clips and raven wing"
Is this the same AIWB (not showing as 2.0) on the website
here?
And Raven wing
here?
FWIW... I carry a G19 with RDS and Streamlight in a Wing Claw 2.5 with DCC monoblock and small wedge, and find the ride height perfect on my slightly squishy in the middle 5'8" frame.
Please take this with a grain of salt, since the picture in my head is not perfect...
If you are smashing your finger into the wing/claw at a height that gives you proper clearance for your fingers, you should look closely at the cant of the holster and a possible rotation problem, maybe with the wedge, if you are using one. The claw should ride directly behind your belt, it should not rise up over the belt and be in a position where you can hit it... If the wing/claw is above the belt, I'd suggest that you rotate the entire holster so that the wing claw is behind the belt, then look to figure out what is causing it to rotate above the belt... Is the wedge off center, wrong height or rotated? Are you carrying it in a body location that is pushing the bottom of the holster into a bad position? Consider positioning the clips on the belt closer to or farther from midline and see if that helps... Consider removing the wedge, seeing if you can find a comfortable position with correct finger clearance, then adding the wedge back on.... You could try this with the holster mounted between your belt and your pants (outside pants but inside belt) so you can see more clearly what's going on... and play around quickly with wedge position...
Of course make sure your gun is unloaded first..
For me, a picture would be helpful.. Hopefully someone will chime in with a better solution.