Adapters and calibers

[Archimagirus]

For those that have multiple suppressors, do you isolate connection type, I.e. Keymo vs Xeno, based on caliber to prevent cross contamination or do you use the same connector on all of your cans?

ETA, if this has been covered before and I missed the thread, my apologies.

[HeavyDuty]

For those that have multiple suppressors, do you isolate connection type, I.e. Keymo vs Xeno, based on caliber to prevent cross contamination or do you use the same connector on all of your cans?

ETA, if this has been covered before and I missed the thread, my apologies.

I just went through this when I realized I had the same mount on 5.56 and 9mm cans (YHM sRx.). I took the path of least resistance and changed the 9mm to Phantom using parts I already had.

Pushing a 9mm round through the 5.56 Turbo K would have been festive…

[jandbj]

I have zero use for anything but direct thread and am at 7 cans… the one exception could be someday something like a dedicated Surefire RC-3… but only because I can’t get it in a direct thread option. Chasing the different mounts and eventual end of lifing of some of them is a monumental paint in the ass. And since all my can use is strictly recreational outside of on duty usage of department owned items, it’s also the simplest route.

[5pins]

I went with the Griffin plan A with my first and just use it on all of my rifles.

[CleverNickname]

I use Keymo on both .22 cal and .30 cal, but I have a dedicated silencer for each rifle so I'm not particularly worried about accidentally putting a .22 cal can on a .30 cal gun. I'm more worried about shooting a 300 BLK cartridge in a 5.56mm gun, and I'm not particularly worried about that either.