Mounting Holosun EPS Carry on a SIG P365 series - lets consolidate tech data

[SoCalDep]

Do you know the McMaster part number for the 8mm version?

Not by heart. I can look it up if you want.

[WobblyPossum]

Not by heart. I can look it up if you want.

Thank you. I’d appreciate it.

[centex]

Do you know the McMaster part number for the 8mm version?

94414A713 Black-Oxide Alloy Steel Torx Flat Head Screws, M3 x 0.50 mm Thread Size, 8 mm Long, Packs of 100


This is pasted from my last order from them a few weeks ago.

[WobblyPossum]

94414A713 Black-Oxide Alloy Steel Torx Flat Head Screws, M3 x 0.50 mm Thread Size, 8 mm Long, Packs of 100


This is pasted from my last order from them a few weeks ago.

Thanks.

[RAM Engineer]

94414A713 Black-Oxide Alloy Steel Torx Flat Head Screws, M3 x 0.50 mm Thread Size, 8 mm Long, Packs of 100


This is pasted from my last order from them a few weeks ago.

I believe that is a Torx Plus drive size. Not sure how well regular Torx bits work on a Torx Plus screw.

[RAM Engineer]

Some people have reported issues with the supplied Holosun EPS Carry screws being a smidge long on some 365 slides. I believe those were the older slides that had the rear sight integral to the cover plate you remove to install the optic. Clusterfrack figured out the McMaster screws of the proper length, and I show those as M3 0.5 x 10mm Torx Plus flat head, part 384-0310-01-0100.

That does not appear to be a normal McMaster-Carr part number. I believe the actual 10mm pn is 94414A714 (posted elsewhere in this thread)

[centex]

That does not appear to be a normal McMaster-Carr part number. I believe the actual 10mm pn is 94414A714 (posted elsewhere in this thread)

http://www.mcmaster.com/catalog/130/3479/94414A713


You'll notice the link above is for the 8mm screw, and the item listed right below it is for the 10mm version you reference. These are both Torx Plus screws.

[RAM Engineer]

I know Duracell was mentioned a couple of times in this thread as to preferred CR1620 battery. But just as an FYI for those who care about such things:

Brand - Country of manufacture
Duracell - Indonesia
Energizer - Indonesia
Panasonic - Indonesia
Maxell - Japan by Hitachi
Toshiba - Japan?
Renata - Switzerland
Murata - Japan

[GJM]

I know Duracell was mentioned a couple of times in this thread as to preferred CR1620 battery. But just as an FYI for those who care about such things:

Brand - Country of manufacture
Duracell - Indonesia
Energizer - Indonesia
Panasonic - Indonesia
Maxell - Japan by Hitachi
Toshiba - Japan?
Renata - Switzerland
Murata - Japan

We have been using Renata 2032, 1632 and 1620 with great performance.

[G19Fan]

Have been quite happy with Duracell 1620s and have a bunch of them.

Would be open to trying Renata in future but no urgent rush to swap.