G45s w/ factory milled Acros are hitting the streets!

[TC215]

sorry for the slight drift away from the original ACRO....

is there a way I can get an image of the factory box label, so I can grab the SKU or needed info to find that model?

what optic you have on that model?

thanks in advance

Call your Glock LE rep and ask for a Glock 45 MOS-5.

[JR1572]

sorry for the slight drift away from the original ACRO....

is there a way I can get an image of the factory box label, so I can grab the SKU or needed info to find that model?

what optic you have on that model?

thanks in advance

I didn’t get a box. They took my old gun and gave me a new one. I think it’s MOS 5. We have RMR06 and Ameriglo green tritium front and plain black rear sights.

Let me know if that helps out.

[PD Sgt.]

My understanding is that Glock makes these currently in three different factory cuts. ACRO, RMR, and another I don’t recall. They are supposed to be agency purchase only, but some overruns find their way to dealers. My ACRO came with the optic, the RMR cut model (from AIM Surplus) did not. The RMR pocket is cut very oversize, enough so that the screws and recoil bosses are the sole support of the optic.

As an aside, the RMR pistols AIM had were by accident. They found out later they weren’t supposed to have gotten them. Also, since they had the covers installed they almost did not notice they were pre-cut.

My personal opinion is if I was going to use the RMR I would probably go MOS with a plate. I would prefer the added support of a close plate even with the extra screws needed to secure the plate. For an ACRO I think the pre-cut from the factory is the way to go.

[TC215]

My understanding is that Glock makes these currently in three different factory cuts. ACRO, RMR, and another I don’t recall.

MOS3 — Leupold
MOS5 — Trijicon
MOS6 — Holosun
MOS7 — Aimpoint

Available in G45s and 47s.

[Sensei]

MOS3 — Leupold
MOS5 — Trijicon
MOS6 — Holosun
MOS7 — Aimpoint

Available in G45s and 47s.

I’ll be jumping on one of those factory 47 ACROs as soon as I can find one…

[SW CQB 45]

I saw some images of the gap on google search.

I wonder if sending the slide to a reputable machine shop for a tighter fitting optic, front recoil bosses and rear threaded recoil bosses is the better heavy-duty option when choosing RMR?