@Lon
RXM on right.
Larger viewing than the 507 comp due to the curved bottom
@Lon
RXM on right.
Larger viewing than the 507 comp due to the curved bottom
Formerly known as xpd54.
The opinions expressed in this post are my own and do not reflect the opinions or policies of my employer.
www.gunsnobbery.wordpress.com
If it handles low sun angle well, it could be a very good alternative.
The 4 MOA dot is a whiff on the small side but totally usable.
Less than 4MOA it gets harder to define dot edges with blooming when it’s turned up enough to pick it out from the surroundings in bright sun.
Following with interest.
And signed up for the LE/MIL discount, as I’m curious what the discounted price is.
With my SRO down, I’m open to an inexpensive backup for future problems that shares the same footprint.
Formerly known as xpd54.
The opinions expressed in this post are my own and do not reflect the opinions or policies of my employer.
www.gunsnobbery.wordpress.com
Put it on a low rise Monstrum quick release mount.
About the same height as with the factory riser.
Higher than the 510c (likely similar to AEMS).
More vertical head position which should be decent.
Picked one up using the discount. It’s too good of a price to not try it out. Going to put it on a metal framed CO gun and test it’s durability.
"Shooting is 90% mental. The rest is in your head." -Nils
I broke down and ordered one…
With LE/MIL discount, less than half the price of a backup SRO, so I’ll give it a try.