Next Best “Kydex” Mag Carrier?

[vcdgrips]

Executive summary- I like them and they have served well in class/quals/edc.

Recall a prior thread in which we were lamenting the demise of the Custom Carry Concepts basic mag carrier.

In an effort to find a suitable replacement- I stumbled across one being sold on EBay for about 15 USD shipped CONUS. It is marketed for 1.5 inch belts though the slot it is approx 1.55 inches. I have no affiliation with them whatsoever.

The pouch is advertises as being 3d printed. it is sturdy with far less flex than kydex.


https://www.ebay.com/itm/17376801194...3ABFBMlo7Dluxh

I offer the following comparisons. eBay Mag (1.5 inch model) CCC BMC. (1.75 inch model) All measurement approx and rounded to nearest mm

Weight 39g v 32g
Height 83 mm v 71mm
Width front-back 40 mm v 36 mm
Width side-side 40mm v 41 mm
Internal Width 23mm v 24mm
IW- side to side 34mm v. 32mm
Belt Loop Width. 6.4mm v 7.6 mm

I have carried the eBay on on the following belts and note the following:

5.11 Apex “Biothane” - pouch moves freely on belt. Cinches fine when worn in field.

Mastermind Tactics Specialist “Shiv Works Ltd Ed”- ditto

Wilderness FF CSM- eBay pouch does NOT move freely and cinches fines

Tenicor Zero- pouch moves freely on belt. Cinches fine

Old School Earnie Hill Horsehide Leather Gun Belt- EBay pouch will NOT thread absent great effort. The BMC will, though it is quite tight

On a whim, I drilled a couple of “drain holes in one to see if it materially affected the release of the magazine ..it did not

[TMc]

I like this one. The belt clip is offset. This way the clip dosen't add any additional bulk between you and the belt. Less printing bump and more comfortable.

https://www.amazon.com/FoxX-Holsters.../dp/B07D9TTHHQ

[HeavyDuty]

I like this one. The belt clip is offset. This way the clip dosen't add any additional bulk between you and the belt. Less printing bump and more comfortable.

https://www.amazon.com/FoxX-Holsters.../dp/B07D9TTHHQ

Have you ever tried it between belt and pants?

[TMc]

Have you ever tried it between belt and pants?

No im in NY and everything must be concealed and I dont even want to print. I wear @ 5 o'clock IWB. I do wear compression sleveless T shirt from underarmour to increase comfort when CC.

[Chuck Whitlock]

Have you ever tried it between belt and pants?

https://pistol-forum.com/showthread....ot-ain-t-no-BS!

Tony is revamping the V2. Post #25.

https://pistol-forum.com/showthread....ne-pouch/page3

[Blades]

Executive summary- I like them and they have served well in class/quals/edc.

Thanks for the recommendation. I had been using a Safariland Model 71.

[vcdgrips]

Blades:

I carry 2 of those in my bag as loaners/mic. pouches as they work for a wide variety of mags/tools lights etc.

[JJN]

These look like the CCC mag pouches, but I can't tell for sure: not a bad deal for a lefty in need of some pouches: https://www.ebay.com/itm/295624094245

[SouthNarc]

Is CCC completely tits up?

[Up1911Fan]

Is CCC completely tits up?

They have been for some time. I used to like their BMC but have been really happy with the Tenicor Fero2 mag pouch.