Launch edition guns are going to be one time limited quantity runs. Now, depending on production delivery schedule they might show up on the market in one or two surges, but its still a limited item. There will be additional colors of the 80X available throughout the year, but the bronze is done on the factory side.
For RDO plates; the main issue we're seeing is on EPS carry optics. It turns out the EPS Carry line can have a thinner deck height than the drawing spec on the 407K (which is what Beretta design and validated with), meaning the screws can bottom out on the slide and prevent the optic from being fully secured to the plate. If you then shoot that setup, the play in the optic fit will cause it to slam around and generally not go well. We're making new custom screws with thread lock patches per Beretta Italy's specs, but in the meantime, it is possible to file down the current screws to resolve this. I'm obliged to recommend this is performed by a trained and qualified gunsmith. But it should be 0.5-0.75mm of material removal IIRC to get those thinner optics to fit up properly.
In general, dealing with evolving third party patterns and shifting standards is a nightmare when it comes to RDOs.