Results 1 to 1 of 1

Thread: The Ultimate EDC Utility Flashlight

  1. #1
    Supporting Business NH Shooter's Avatar
    Join Date
    Sep 2014
    Location
    New Hampshire, U.S.A.

    The Ultimate EDC Utility Flashlight

    E1 Inspector HF










    Product Details

    • Beam Pattern: Flood
    • 55 - 115 - 570 lumens | 2,100 cd (16340 Li-ion)
    • 50 - 100 - 325 lumens | 1,200 cd (CR123)
    • Nichia 319A | Neutral White | 80 CRI
    • 3.32" AOL
    • 2.6 Ounces with Cell
    • IPX-7 Water Proof

    Building on the success of the E1 18350 Inpector, the new Inspector HF (Hands Free) offers greater ease of handling, lower weight, smaller size and lower cost.

    The high CRI, flood beam pattern of the superbly easy-to-use Inspector HF is excellent for everyday, short distance tasks. The low setting is perfect for glare-free, arm's length general use while the high setting can illuminate large areas inside or out. Professional uses include mechanical inspections of vehicles and equipment, construction work, emergency roadside use, etc.

    Inspector HF features;

    - Three output modes controlled by on/off cycles of the tailcap switch. Utilizing a memory function based on off-time, if the light is left off for more than two seconds, the light will activate at the last output level used. If the light is left off for less than two seconds, the mode will advance to the next level.

    - Fully shrouded tail that allows the light to "tail stand" upright on a flat surface for hands-free use.

    - A robust .055" thick 2-way clip made of 410 Stainless Steel that has been hardened, tempered, and powder coated with a matte black finish. The clip allows the light to be mounted to the bill of a hat and serve as a headlamp, or to be used as a traditional pocket clip for ease of carry.

    - Removable grip ring for improved handling ergonomics.

    - Carclo 10507 Triple TIR lens to produce a broad, smooth beam with a low-candela center hot spot. The bezel lens is made of optically coated UCL tempered glass.

    The optional stainless steel Mil-Spec QPQ black crenulated bezel ring provides additional protection from drop damage and allows the user to see the light is on when placed bezel-down on a flat surface.

    The Inspector HF may be powered by a one (1) CR123 battery or by a single 16340 flat top Li-ion cell for maximum output.

    P-F member 10% discount applies.

    Thanks for taking a look!
    Last edited by NH Shooter; 01-20-2023 at 04:41 PM. Reason: Spec Corrections
    EDC Light Builder | No Nonsense Everyday Carry Flashlights | EDC Light Builder P-F Sub-forum

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •