Results 1 to 9 of 9

Thread: FART Wrench

  1. #1

    FART Wrench

    Bought a 3D printed FART (Frankford Arsenal Rotary Tumbler) F.A.R.T. Wrench off a guy on etsy. Works great! I got the one with the long handle. Here is a link:

    https://www.etsy.com/listing/1205140...aid=59e53818d5

  2. #2
    Deadeye Dick Clusterfrack's Avatar
    Join Date
    Jun 2013
    Location
    Wokelandia
    Quote Originally Posted by 4given View Post
    Bought a 3D printed FART (Frankford Arsenal Rotary Tumbler) F.A.R.T. Wrench off a guy on etsy. Works great! I got the one with the long handle. Here is a link:

    https://www.etsy.com/listing/1205140...aid=59e53818d5
    Purchased. Thanks for posting.
    "You can never have too many knives." --Joe Ambercrombie
    "You don’t really graduate from certain problems or certain things… like you always have to work on trigger control and pulling the trigger straight. " --Ben Stoeger 1/24/2018

  3. #3
    Site Supporter
    Join Date
    Jul 2011
    Location
    PNW
    Quote Originally Posted by 4given View Post
    Bought a 3D printed FART (Frankford Arsenal Rotary Tumbler) F.A.R.T. Wrench off a guy on etsy. Works great! I got the one with the long handle. Here is a link:

    https://www.etsy.com/listing/1205140...aid=59e53818d5
    I picked one up. What a difference. Thanks for the heads up.

  4. #4
    Member DMF13's Avatar
    Join Date
    Feb 2014
    Location
    Nomad
    Wouldn't this work just as well, for half the price:
    https://www.amazon.com/dp/B0B88HT4G3...haWwp13NParams

    For me the tiny bit of leaking I had when I first used my FART Lite was solved by apply silicone o-ring grease to the rubber gasket, rather than tightening the lid more. Hand tightening, with a lightly greased gasket solved it.
    _______________
    "Whom shall I send, and who will go for us?" Then I said, "Here I am. Send me." - Isaiah 6:8

  5. #5
    Member
    Join Date
    Oct 2011
    Location
    Texas
    Quote Originally Posted by DMF13 View Post
    Wouldn't this work just as well, for half the price:
    https://www.amazon.com/dp/B0B88HT4G3...haWwp13NParams

    For me the tiny bit of leaking I had when I first used my FART Lite was solved by apply silicone o-ring grease to the rubber gasket, rather than tightening the lid more. Hand tightening, with a lightly greased gasket solved it.
    Yes, every household should have multiple strap wrenches.

    I’ve only done four cycles on a “Lite” model, with no signs of leakage so… I’m out. Maybe the bigger models need it more.
    When you have to shoot, shoot, don't talk. -Tuco
    Today is victory over yourself of yesterday... -Miyamoto Musashi

  6. #6
    Site Supporter Slavex's Avatar
    Join Date
    Feb 2011
    Location
    Canada
    oooh thanks for posting this. I find that sometimes removing the lid is almost too hard to do, and I don't spin em on tight really, just enough to not leak. But I tumble hot, some maybe as it cools off while running that makes things tighten up?
    ...and to think today you just have fangs

    Rob Engh
    BC, Canada

  7. #7
    I don’t own a FART yet, but what I’ve been using to prevent leaking on my low budget tumbler is dielectric grease

  8. #8
    Deadeye Dick Clusterfrack's Avatar
    Join Date
    Jun 2013
    Location
    Wokelandia
    I like my 3D printed fartwrench. It's a one-trick pony, but easier than a strap wrench.
    "You can never have too many knives." --Joe Ambercrombie
    "You don’t really graduate from certain problems or certain things… like you always have to work on trigger control and pulling the trigger straight. " --Ben Stoeger 1/24/2018

  9. #9
    Member
    Join Date
    Jan 2021
    Location
    Colorado Springs
    I just wet the gasket with my finger tip covered with the Dawn I just put in. This makes it seal without having to tighten the lid near so tight.

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •