PSA Dagger RMR Cut Slides compatible with Gen 2/3 G19s

[HCM]

Many of us here I’ve been shooting for a while have Gen 2 or Gen 3 Glock 19s or Glock 23s in the safe.

For about or slightly more than the cost of having one of those old OEM slides cut for an optic PSA is now selling RMR cut slides with lower 1/3 or suppressor height sights for between $159 and $179. These slides include everything except the barrel and recoil spring assembly. They also include a cover plate in case you are not mounting an optic right away.

https://palmettostatearmory.com/psa-...black-dlc.html

https://palmettostatearmory.com/psa-...black-dlc.html

I ordered one of the $169 models. It arrived today and so far I’m impressed. The machining and finish are well done, there are no sharp edges, and it passes Glock Armorer function checks. I install the dagger slide on my lone Gen 3 G19 as well as a pair of Gen 2 G19s. The slide fit and dry functioned on all three guns.

If this works out it may be an economical way to breathe new life into older guns.

[AMC]

Many of us here I’ve been shooting for a while have Gen 2 or Gen 3 Glock 19s or Glock 23s in the safe.

For about or slightly more than the cost of having one of those old OEM slides cut for an optic PSA is now selling RMR cut slides with lower 1/3 or suppressor height sights for between $159 and $179. These slides include everything except the barrel and recoil spring assembly. They also include a cover plate in case you are not mounting an optic right away.

https://palmettostatearmory.com/psa-...black-dlc.html

https://palmettostatearmory.com/psa-...black-dlc.html

I ordered one of the $169 models. It arrived today and so far I’m impressed. The machining and finish are well done, there are no sharp edges, and it passes Glock Armorer function checks. I install the dagger slide on my lone Gen 3 G19 as well as a pair of Gen 2 G19s. The slide fit and dry functioned on all three guns.

If this works out it may be an economical way to breathe new life into older guns.

Well, shit. There went almost $200.

[beenalongtime]

Many of us here I’ve been shooting for a while have Gen 2 or Gen 3 Glock 19s or Glock 23s in the safe.

For about or slightly more than the cost of having one of those old OEM slides cut for an optic PSA is now selling RMR cut slides with lower 1/3 or suppressor height sights for between $159 and $179. These slides include everything except the barrel and recoil spring assembly. They also include a cover plate in case you are not mounting an optic right away.


https://palmettostatearmory.com/psa-...black-dlc.html

I ordered one of the $169 models. It arrived today and so far I’m impressed. The machining and finish are well done, there are no sharp edges, and it passes Glock Armorer function checks. I install the dagger slide on my lone Gen 3 G19 as well as a pair of Gen 2 G19s. The slide fit and dry functioned on all three guns.

If I read correctly, in the other post, you said you bought the ones with the Ameriglo night sights?
If so, can you show what the front sight looks like?
Their item description and image of the sights (when looking at the parts individually), don't match.
TY

[HCM]

If I read correctly, in the other post, you said you bought the ones with the Ameriglo night sights?
If so, can you show what the front sight looks like?
Their item description and image of the sights (when looking at the parts individually), don't match.
TY

The one I bought only has tritium in front with a U notch rear. I would’ve preferred plain black sites but that model was out of stock at the time.

[beenalongtime]

The one I bought only has tritium in front with a U notch rear. I would’ve preferred plain black sites but that model was out of stock at the time.

I was hoping you would SHOW the front sight. They list it as having a white ring, yet the parts image, shows no or a black ring around the vial.

[ECVMatt]

Waiting for an update once you shoot it. I have a few Gen 3's that might benefit from these slides. Being able to keep the factory slide OEM is a huge bonus.

Thanks for the heads up.

[HCM]

I was hoping you would SHOW the front sight. They list it as having a white ring, yet the parts image, shows no or a black ring around the vial.

There’s no white ring. Not that I care since optics are the primary sighting system.

[HCM]

Mounted an old RMR 02 with a Battlewerx sealing plate and screws from a Trijicon sealing plate kit. The screws which come with the RMR are, as usual, too long. The BUIS are Lower 1/3 (or slightly less) with the RMR. Mo’ window mo’ betta. There is a slight gap front and back but fit is what you would expect for a generic budget optic cut.

[beenalongtime]

Thank you.

I just wish the description matched the item sold. When they don't, I've had too many gambles on which I would get.

[HCM]

I got the Dagger slide out to the range and got it zeroed this evening.

The Good:

Ran 150 rounds (50 Monarch Russian steel case 115 FMJ, 50 Blazer aluminum 115 FMJ and 50 124 grain +p Gold Dots. without issue.





Monarch at 25 yards



Gold Dots at 25 yards.



The Bad:

I forgot how incompatible older Glocks are with high grips:





The Ugly:

As it got dark I shot using some handheld light techniques. There was a group of young guys in the next bay in plate carriers shooting suppressed long guns under NODS. Suffice to say all of them were younger than my 1992 vintage GEN 2 Glock 19…… :-/