Did some more shooting with it yesterday (.40, G23, my 155gr load), and it does seem a hair snappier than wheeln running TG or HP38.
Really flinging my brass into orbit. Damn shame I don't have access to a chrono.
Doin' all right though, shot a BILL Drill with one shot out of the -0 in 2.82.
I think CFE pistol is fantastic for the 9mm , I use HP-38 for low range to mid-range velocities and CFE for mid-range to high range velocities loads and gives the best deviation between shots on a chronograph than any powder I have used . Burns clean and meters very good .
I tend to shoot either plinkers or all out loads in the .40 and 10 mm so it's HP-38 and Longshot for me . I think CFE is a little too fast for the .40 and 10mm as I once was coronagraphing 10 mm and I went WHOA before even looking at the coronagraph from a spike in pressure . So when I use CFE with .40 or 10 mm I keep a 3 or 4 tenths below Max.