Old Bakersfield PD qual

[SCCY Marshal]

Seems like a 7" circle on a sheet of legal paper would be damn close.

If only Word allowed you to specify a paper size and place a 7" circle in the center.....

https://ipfs.io/ipfs/QmQUEJsVspw3Gku...me=7inCirc.pdf

I quickly used Draw from Libre Office (a free program suite).

[jlw]

Seems like a 7" circle on a sheet of legal paper would be damn close.

If only Word allowed you to specify a paper size and place a 7" circle in the center.....

I made one in Publisher that will print on 11x17 paper, complete with the other outline, but I'll probably just play with it on existing targets for personal edification.

[SCCY Marshal]

Whoops, missed the legal-size stipulation. Here is a 7" grey circle centered on a legal sheet:

https://ipfs.io/ipfs/QmeGpTBgzYSjLCn...e=7inLegal.pdf

[JCN]

https://ipfs.io/ipfs/QmQUEJsVspw3Gku...me=7inCirc.pdf

I quickly used Draw from Libre Office (a free program suite).

That’s helpful, thanks! The letter paper one is probably most useful since people could print that out and if a shot was within 1/4” of sides or 1” from the top/bottom that would do it.

Edited for proper dimensions, sorry!

[SCCY Marshal]

Deleted for wrong dimensions.

[JCN]

11"x17" sheet with 10.5"x11.5" box and 7" circle:
https://ipfs.io/ipfs/Qma958FiEKmL6Yd...le_On11x17.pdf

Should be a 9x13” box with a 7” circle if we are trying to reproduce the original target dimensions as per the article.

I typoed the top/bottom versus sides in my previous post, sorry!

[SCCY Marshal]

Should be a 9x13” box with a 7” circle if we are trying to reproduce the original target dimensions as per the article.

I typoed the top/bottom versus sides in my previous post, sorry!

Done and I need a life:
https://ipfs.io/ipfs/QmPEKMZTjyZxVLN...cleOn11x17.pdf

[Gun Nerd]

I shot it twice today using a B-8 repair center. Anything inside the 8 ring was called a 10 and outside but still in rings was a 9. I shot a pair of 99s with the point down shots about 1/4 - 1/2" out (!). No issues with times; shot from Comp-Tac OWB holster and a Gen 5 G-17.

Wayne, did you use the original par times or add the .3? Or did it not matter?

[Wayne Dobbs]

Wayne, did you use the original par times or add the .3? Or did it not matter?

I ran the drills without a par set and met all the original times on both runs.

[Gun Nerd]

I ran the drills without a par set and met all the original times on both runs.

Thanks. The scores posted here certainly seem to be validating that 100-point level as a mark of highly skilled shooters.