Formerly known as xpd54.
The opinions expressed in this post are my own and do not reflect the opinions or policies of my employer.
www.gunsnobbery.wordpress.com
Had a chance to get to the range for a brief visit yesterday. Fortuitously, my reduced weight spring from MOA arrived right before I left the house so I switched it out when I got to the range. MUCH more pleasant to shoot w that and the Limbsaver pad. I shot some 9 pellet FC, some 9 pellet off brand stuff and some bird shot. Cycled it all without a problem with the exception of the first time I ghost loaded it. Subsequent ghost loads worked fine. Some groups w the FC stuff. The groups are hitting high because my sights were off.
And with the other 9 pellet load.
Formerly known as xpd54.
The opinions expressed in this post are my own and do not reflect the opinions or policies of my employer.
www.gunsnobbery.wordpress.com
So here’s some pics of the section of the stock I cut off compared to the Limbsaver chart.
Grind to fit pad
As you can see, it doesn’t look like the screw holes in the pad will match up to where the holes will be on the stock.
Pad specifically for the 3000
With that in mind, I’m not sure what to tell ya. Maybe order the grind to fit and see if there’s any way you can get the screws to line up. If not, send it back and get the 3000 specific one.
Formerly known as xpd54.
The opinions expressed in this post are my own and do not reflect the opinions or policies of my employer.
www.gunsnobbery.wordpress.com
On a more positive note, it appears as if the Magpul forward sling mount works.
Formerly known as xpd54.
The opinions expressed in this post are my own and do not reflect the opinions or policies of my employer.
www.gunsnobbery.wordpress.com
Lon what does yours measure now that it is cut?
Formerly known as xpd54.
The opinions expressed in this post are my own and do not reflect the opinions or policies of my employer.
www.gunsnobbery.wordpress.com
Formerly known as xpd54.
The opinions expressed in this post are my own and do not reflect the opinions or policies of my employer.
www.gunsnobbery.wordpress.com