"You can't win a war with choirboys. " Mad Mike Hoare
VIM Tools HBR5 micro ratchet will let you reach into the holster side and a flat blade 1/4” bit with the middle ground out will do the trick
Does the above offend? If you have paid to be here, you can click here to put it in context.
Last edited by JCN; 06-15-2021 at 10:19 AM.
can't longer screw not enough threads exposed inside the body of the nut. Drilling out is where this may end up.
tried oil, it got on the face of the screw inside the holster body and made it HARDER to hold in place. Been trying to dry it out various ways since.
To try and clarify part of the problem, the red circle indicates the worst condition, which is stuck down in a little crevice in the holster body, making all sorts of problems for me trying to grip the nut. The Yellow circle indicates the easier to reach screw, but whatever solution works for the red one will undoubtedly work for the yellow.
Of course, there is an end state where the red one gets destroyed to remove it while the yellow comes out in-tact and re-usable.
Does the above offend? If you have paid to be here, you can click here to put it in context.
Could you destructively drill out all of the hardware without damaging the kydex?
I am not your attorney. I am not giving legal advice. Any and all opinions expressed are personal and my own and are not those of any employer-past, present or future.
Does the above offend? If you have paid to be here, you can click here to put it in context.
Yes, or you can get a Dremel-like tool for like $10 at Harbor Freight that has a set of diamond cutting wheels you can chuck in the provided brass collet and go to work on the facing screw head.
https://www.harborfreight.com/power-...-pc-63235.html
You may end up with some small cuts in the kydex after you get done, but at least the damned screw can come out. Or so I've heard.
For anyone following along at home….
I gave the fuck up and ordered a new DOH bracket. The goal here was to re-purpose the existing bracket from one holster to another, but for $17 shipped from Stoeger and the ability to keep the old holster intact if needed and the cost of my time… plus the tool costs more than the bracket…
D U N
Does the above offend? If you have paid to be here, you can click here to put it in context.