Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31

Thread: Belts for AIWB that work with DCC clips?

  1. #21
    Site Supporter Irelander's Avatar
    Join Date
    Apr 2014
    Location
    Venango County, PA
    Quote Originally Posted by theJanitor View Post
    The belt has a hook for a buckle and the tail is sewn into a loop. Engage the loop with the hook and set the belt length with the Velcro. Undoing the belt is as simple as unhooking the tail. No constant readjustment after using the restroom, no loud Velcro sounds, and no wearing out the Velcro with each undoing of the belt.




    Sent from my iPhone using Tapatalk
    Cool thanks. The G-Hook is the great feature of the Voland Atlas belts. I'd like to try the OX...too bad they don't make them anymore. Hopefully @orionz06 will show us something special soon. Here's hoping for a hook!
    Jesus paid a debt he did not owe,
    Because I owed a debt I could not pay.

  2. #22
    Thanks for all the input.

    I went with the Specialist Pro.

    https://www.mastermindtactics.com/shop/specialist-pro

    In stock and on sale. Less than $30 delivered. Tough to pass up that deal.

    Should arrive Saturday. Interested to put hands on and see how it works.

  3. #23
    So much for me getting my belt this past Saturday.

    Mastermind shipped the day after purchase but the USPS let it sit in New Hampshire for 4 days before sending it my way and no update on delivery date.

  4. #24
    Specialist pro is awesome ^

  5. #25
    Quote Originally Posted by Joel View Post
    I would try the NexBelt. The Warrior Poet Society version with the very small buckle. It seriously is amazing.
    Honestly, after six months I found the small-buckle Nexbelt sold as suitable for AIWB to be too stiff for AIWB for me. Great for regular IWB or for OWB. (Mine isn’t WPS branded though, perhaps there’s a difference?).

    Running a VDev Megingjörð V4 now, and it has been absolutely transformative compared to fully-stiff belts for this specific purpose. Super comfortable and totally hides a VP9 with comp and X300. Hard snap onto the Mod4 DCC clips with my Floodlight. It also does a better job keeping the spare mag (in a (discontinued?) PHLster Skeleton mag carrier) from gut-punching me when sitting in deep bucket seats in my sports cars.

    And of course Enigma and Enigma LB rigs for when clothing choices dictate that solution, also very comfortable.
    Last edited by Archer1440; 05-20-2021 at 10:26 AM.

  6. #26
    Thought a follow up was needed.

    Got my Specialist Pro, it is very well built, but is a bit more substantial than I usually need for EDC of my P365x but it works great for my Glock 45.

    Got a V-Dev MEGINGJÖRÐ and it more than enough to do the job for my EDC and very comfortable to wear.

    The one thing that I ended up having to do was replace one of my 1.5 inch DCC with a 1.75 inch as I wear my holster at about 1:30 with about 10 degrees of reverse can’t and that small amount would not allow one of the 1.5” clips to fasten over either belt.

    If you wear straight drop or more towards the 12 o clock position then the 1.5 DCC are good to go without any issues.

    Very happy with both belts as each are well built and serve a specific purpose.

    Thanks for the input on the thread.

  7. #27
    Site Supporter
    Join Date
    Feb 2021
    Location
    NH
    Quote Originally Posted by mastiffkb View Post
    Thought a follow up was needed.

    Got my Specialist Pro, it is very well built, but is a bit more substantial than I usually need for EDC of my P365x but it works great for my Glock 45.

    Got a V-Dev MEGINGJÖRÐ and it more than enough to do the job for my EDC and very comfortable to wear.

    The one thing that I ended up having to do was replace one of my 1.5 inch DCC with a 1.75 inch as I wear my holster at about 1:30 with about 10 degrees of reverse can’t and that small amount would not allow one of the 1.5” clips to fasten over either belt.

    If you wear straight drop or more towards the 12 o clock position then the 1.5 DCC are good to go without any issues.

    Very happy with both belts as each are well built and serve a specific purpose.

    Thanks for the input on the thread.
    I wear a Pro daily and have been very satisfied,
    I also carry in the same position and find the
    rearward 1.5" DCC clip is a bitch to get clipped
    or released.
    I know it's not the belt as I've had the same issue
    with other web and leather belts.
    The 1.75" clip also crossed my mind as a possible
    solution, do you find that the rig moves around
    or stays put pretty well ?

  8. #28
    I have found that the 1.75 inch DCC still holds the holster stable.

  9. #29
    I'm pretty happy with the Magpul Burro Get 2 Belt. The Carbon Tactics Ti Hook works ok, it's a little thick because the nylon is doubled up on the right side of the buckle. The nice thing about the Magpul belt is that it doesn't look like a tactical belt. It's got a really boring looking regulation belt buckle.

    I don't care for velcro on my belt.

  10. #30
    Delta Busta Kappa fratboy Hot Sauce's Avatar
    Join Date
    Oct 2014
    Quote Originally Posted by DougNg View Post
    I'm pretty happy with the Magpul Burro Get 2 Belt. The nice thing about the Magpul belt is that it doesn't look like a tactical belt. It's got a really boring looking regulation belt buckle.
    I really like the look of that buckle.
    Gaming will get you killed in the streets. Dueling will get you killed in the fields.
    -Alexander Hamilton

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •