I’m just wanting to know what LL’s good news is.
That and an a 6 shot SP101 or a 6 shot LCR 3 inch.
I really want a full sized, all steel .22lr DA revolver with an optic as a training gun.
The trick is do I want to hunt up an older 4" blued 6 shot K Frame M17 or M18? Should I look for a slightly newer 617? I'm even pondering going nuts with the $$$ and snagging a Colt King Cobra... but only if I can't grab my first options.
"You win 100% of the fights you avoid. If you're not there when it happens, you don't lose." - William Aprill
"I've owned a guitar for 31 years and that sure hasn't made me a musician, let alone an expert. It's made me a guy who owns a guitar."- BBI
Any legal information I may post is general information, and is not legal advice. Such information may or may not apply to your specific situation. I am not your attorney unless an attorney-client relationship is separately and privately established.
"You win 100% of the fights you avoid. If you're not there when it happens, you don't lose." - William Aprill
"I've owned a guitar for 31 years and that sure hasn't made me a musician, let alone an expert. It's made me a guy who owns a guitar."- BBI
I have two older, blued Model 17s (one a 17 no dash, and a 17-3) and a modern 617 (can't remember the dash). The modern 617 is the way to go.
1) ten shots versus 6
2) the more charge holes mean less rotation of the cylinder on each pull of the trigger. This speeds up shot times because there's less momentum on the cylinder when it stops.
3) I find my model 17s are more strictly target guns. The tolerances are tighter. This sounds good, but I have to run a bore brush through the charge holes about double as frequent (every four reloads vs every 8 reloads) to clean out the carbon ring in the chambers. Admittedly, I'm using the crappiest ammo I have. The chamber are reamed tighter, and this shows up on the paper, but it's much more maintenance intensive. Coupled with the 4 extra chambers, the 617 will shoot much longer than a 17 before needing attention.