Who’s running a different weight recoil spring in their PDP, and why?
Wondering if the price is worth the reward?
Thanks
Steve
Who’s running a different weight recoil spring in their PDP, and why?
Wondering if the price is worth the reward?
Thanks
Steve
Swapped into a 15 pound ZR Tactical with brass guide rod very recently (4" slide) trying to tame the muzzle flip somewhat. I've only put two mags through it with since the swap and my hands were so cold I had a hard time feeling the trigger. Not sure it was worth it. Seems to have lightened the trigger in a way I don't care for either. Waiting for things to thaw out a little and I will give it a better go.
All that is necessary for evil to triumph is for good men to do nothing.
No one is coming. It is up to us.
That’s weird.
The Recoil spring shouldn’t have any effect on the trigger pull.
My full size / 4.5” PDP was noticeably over sprung. Though my complaint was muzzle dip on the return of the gun rather than muzzle flip. I have found I need to grip the PDP differently (applying grip pressure in different areas) vs the Glock and the P320..
Replaced the 18lb RSA. Initially tried the ZR tactical I captured guide rod with a 13lb then a 15lb spring. Just switched to the ZR tactical captured RSA for convenience.
Maybe the trigger pull thing is just in my head. The ZRT is uncaptured and thus, I've not been motivated enough to swap them and try the trigger with the different springs back to back. But from the first dry pull after the ZRT install, I was like, "What just happened?"
Uncaptured spring is a PITA. I went that way because I know early Glock springs were uncaptured so I thought, "How bad can it be?" I quickly learned why Glock changed.
All that is necessary for evil to triumph is for good men to do nothing.
No one is coming. It is up to us.
Thanks for the replies, think I’m gonna pick up a zr tactical 15lb spring and guide rod. Pdp full size will be range/idpa toy.
I just got my optics plate from walther. Came with x2 screws, do i use those screws to mount the plate to pistol, then use holosun screws to mount optic to plate? Or should I just get a chpws plate?