Given that P99/PPQ sights are not Glock pattern the way the PDP ones are, and their slide profile is much less chunky than the PDP, I'm not sure that's a safe assumption.
Wacky photo - it's downright weird to see a 1st generation P99 frame with a PDP slide on it, but given the design/parts commonality between the P99, PPQ, and PDP, I expect it probably functions, albeit with no decocker function, of course.
[QUOTE=olstyn;1214266]Given that P99/PPQ sights are not Glock pattern the way the PDP ones are, and their slide profile is much less chunky than the PDP, I'm not sure that's a safe assumption.
The shoe on the MGW Sight Pro is internal in the slide and has no relationship to the specifics of the externals of the slide or the sights- the rail dimensions are all that matter.
The Sight Pro can be set up for either angled or flat sights, and the “chunkiness” of the slide doesn’t matter either, as that is an independent adjustment.
Mine has paid for itself several times already, it is the best overall solution for this sort of thing, especially when running tritium sights (which don’t always get along with a hammer and punch).
Of course if you only have a couple of pistols, or never change out sights, it’s overkill.
[QUOTE=Archer1440;1214311]Thanks for the clarification - that makes perfect sense then. As someone who only has a pair of P99s (one full size, one "c"), and who uses an aftermarket rear sight on both of them which retains the factory windage adjustment mechanism, I don't need a sight pusher at all (sights slide in and out of the P99's slide under finger pressure alone, and are retained by the adjustment mechanism), so I didn't know what I didn't know.
Does anybody have a source for 18rd mags? I can’t find Walther or Canik mags anywhere.
I e’mailed Taylor Freelance regarding extension compatibility. They state that while their Walther 140mms will fit on a Canik, the Canik mag catches are about 0.050” in the wrong place (they did not specify where). They do not recommend their use with extensions because this apparently presents the rounds low.
FWIW, and back to the waiting room for me. I’ve sourced 5 Canik mags and I hope they’ll be fine for range use, but for now I’ll only be putting extensions on my two OEM Walther mags for competition.
I just got my Walther factory optic plate in but it didn't come with screws and the screws that come with the Holosun are too long. Anyone know what the right screws are to mount a Holosun 407c/507c?
From Walther, $46 each. I don't know if this is needed or a fair deal, just got the email because I'm on Walther's list.