Page 20 of 31 FirstFirst ... 10181920212230 ... LastLast
Results 191 to 200 of 303

Thread: Shadow Systems DR920

  1. #191
    Quote Originally Posted by reloader550 View Post
    How good is the accuracy at 25 yards or more?
    The only one of these I've "benched" at 25 yards in my MR918. This is their early original gun and was replaced shortly after introduction with the MR920. Essentially the slide and barrel went unchanged with most of the 918/920 changes being ergonomic changes to the frame.

    Anyway, my 918, with decent ammo, seemed to be about a 2.5" gun at this distance. I assume the newer 920 series would be about the same.

    Sent from my SM-G970U using Tapatalk

  2. #192
    You and Cornstalker are making me really want one of these. I was looking at a 17 or 34 mos but the DR920 is really nice looking as far as price for features.

    Any idea when the acro version will be available to us mere mortal civilians?

  3. #193
    Just finished up a three day instructor development course. Not a ton of rounds fired personally but I did loan out my DR to a couple shooters. 2 in particular. 1 is a current Shadow Sytems owner who wanted to play with gun+dot. The other was running another Glock-type gun and was curious about the Shadow Systems as a whole. Both commented on how well the gun handles with the non-Shadow Systems owner commenting most favorably on grip texture, the built-in beavertail and the trigger guard undercuts.

    Sent from my SM-G970U using Tapatalk

  4. #194
    Quote Originally Posted by Tokarev View Post
    Just finished up a three day instructor development course. Not a ton of rounds fired personally but I did loan out my DR to a couple shooters. 2 in particular. 1 is a current Shadow Sytems owner who wanted to play with gun+dot. The other was running another Glock-type gun and was curious about the Shadow Systems as a whole. Both commented on how well the gun handles with the non-Shadow Systems owner commenting most favorably on grip texture, the built-in beavertail and the trigger guard undercuts.

    Sent from my SM-G970U using Tapatalk
    I find my mr920/mr918s have lower recoil than a g19. I also run oem g19 slides on all my mr920/mr918s and the same slide has faster split times on a shadow systems frame vs oem

  5. #195
    Member
    Join Date
    Apr 2015
    Location
    Ohio
    Quote Originally Posted by G19Fan View Post
    I find my mr920/mr918s have lower recoil than a g19. I also run oem g19 slides on all my mr920/mr918s and the same slide has faster split times on a shadow systems frame vs oem
    What generation Glock factory OEM slides work best with the MR920 grip frame ? Also, do you use your MR920 barrel in your Glock slides or do you use the SS MR920 barrel in the Glock slide ?

  6. #196
    Quote Originally Posted by Biggy View Post
    What generation Glock factory OEM slides work best with the MR920 grip frame ? Also, do you use your MR920 barrel in your Glock slides or do you use the SS MR920 barrel in the Glock slide ?
    Any gen will work gen 3 just get the conversion front.

    Gen 4 or gen 5 work aa is

    I use all oem glock

  7. #197

  8. #198
    Frequent DG Adventurer fatdog's Avatar
    Join Date
    May 2016
    Location
    Rural Central Alabama

    Anybody run one of these in production or CO?

    I have been very intrigued by this gun, just curious if anybody had run one in carry optics or production. There was an article about the DR920 in the latest USPSA magazine which told me exactly nothing I did not already know. I have a 5moa SRO sitting around that needs a home and I will either use my GSSF coupon and get another G17 and direct mill into that slide or try one of these.

  9. #199
    Quote Originally Posted by fatdog View Post
    I have been very intrigued by this gun, just curious if anybody had run one in carry optics or production. There was an article about the DR920 in the latest USPSA magazine which told me exactly nothing I did not already know. I have a 5moa SRO sitting around that needs a home and I will either use my GSSF coupon and get another G17 and direct mill into that slide or try one of these.
    The Humble Marksman has done some stuff with Shadow Systems. You'll probably find more with a quick search.



    Sent from my SM-G970U using Tapatalk

  10. #200
    Site Supporter
    Join Date
    Aug 2011
    Location
    TEXAS !
    Anyone have time on the new compensated model, the DR920 P ?

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •