Page 2 of 31 FirstFirst 123412 ... LastLast
Results 11 to 20 of 303

Thread: Shadow Systems DR920

  1. #11
    Site Supporter MGW's Avatar
    Join Date
    May 2012
    Location
    Kansas
    Local range is a distributor for them. I’ll keep an eye out. They put pretty much everything in their rental counter. Looking forward to trying one.
    “If you know the way broadly you will see it in everything." - Miyamoto Musashi

  2. #12
    Quote Originally Posted by Shadow View Post
    I've had my eye out for a DR920 as well, no luck either. If they are shipping I'd like to know where.
    Quote Originally Posted by MGW View Post
    Local range is a distributor for them. I’ll keep an eye out. They put pretty much everything in their rental counter. Looking forward to trying one.
    Not sure what's going on. I would have figured we'd have seen at least one or two on gunstroker by now. None on Gallery of Guns either.

    Sent from my SM-G970U using Tapatalk

  3. #13
    Anyone had any luck locating a DR yet? Shadow Systems posted some days ago that guns were shipping. This was before the Texas weather went upside down so at least some should have cleared the loading docks.

    Sent from my SM-G970U using Tapatalk

  4. #14
    Site Supporter MGW's Avatar
    Join Date
    May 2012
    Location
    Kansas
    Checked today and my local dealer didn’t have any info on them yet. They were also out of stock on MR920s.
    “If you know the way broadly you will see it in everything." - Miyamoto Musashi

  5. #15
    2 of my local shops checked their sources for me and no luck here either.

  6. #16
    Another picture stolen from socialist media.



    Sent from my SM-G970U using Tapatalk

  7. #17
    Behold! SHADOW SYSTEMS NEW DR920!

    Probably the best way to think about this is as Gen4.5. It uses the original pattern slide release (non-ambi) but the barrel and locking block are Gen5 based. This means a Glock 19 or MR920 slide will fit. In fact the slide itself accepts the G19 recoil system but is extended to work with a G17 dust cover.

    I also notice that the firing pin is round and not rectangular as is also the case with Gen5 guns. The firing pin on my MR920 is rectangular ala old Glock. I assume Shadow is going to use round firing pins in everything going forward? It wouldn't really make sense to manufacture and stock 2 different types.

    Otherwise, the gun follows the MR920 in that it has the same sort of rough "grip tape" texturing and uses the slide-on backstrap inserts. It also has the pin-on mag well and the built-in beavertail.

    The optic cut is the same as that of the MR920. Same deep cut (and elimination of the extractor depressor) that will work with multiple optics.

    The light mounting point appears to be Glock and not 1913. I guess I'd have preferred 1913 but I don't know if anyone really cares.

    No rounds fired yet. I can maybe fix that this coming weekend.

    In the meantime, let me know if there are any questions I can answer.









    Sent from my SM-G970U using Tapatalk

  8. #18
    I do find it interesting that Shadow Systems basically made a big Glock 19 rather than a Glock 17. This makes sense given that they already made the slide for the MR920L.

    What I don't understand is why they didn't make a Glock 47. They have it here just by taking about half an inch off the dust cover. This would have allowed them to make a Glock 17 and a Glock 45 using slides they already make. It isn't too late but now they'd need a new frame mold and I assume they ain't cheap.

    Someone who is talented and has experience working with plastic frames such as @TXPO or Boresight Solutions could probably trim the dust cover and make it look factory.







    Sent from my SM-G970U using Tapatalk

  9. #19
    Well done sir, looking forward to your range report. Where did you locate one?

  10. #20
    Quote Originally Posted by Tokarev View Post
    @TXPO
    Doh!

    This should have been @Texaspoff

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •