Beretta 92D w/ 92X Grip

[OlongJohnson]

@e_stern. Do these come with the over grip that simulates a standard 92?

If not, are those grips available currently from Beretta.

https://www.berettausa.com/en-us/m9a...ertec/eu00083/

https://www.berettausa.com/en-us/m9a...m9a3/jgm9a3lb/

[Doc_Glock]

https://www.berettausa.com/en-us/m9a...ertec/eu00083/

https://www.berettausa.com/en-us/m9a...m9a3/jgm9a3lb/

This is not helping. If that G10 was available in the past I never would have sent the M9 A3 down the river.

[OlongJohnson]

This is not helping.

Nobody ever said enabling was helping.

[AdioSS]

Unless something drastically changes in the market, .40 for defensive use is essentially going the way of the dodo. Even with the shortage of 9MM today (which won't last forever).

I would STRONGLY urge that you check out some of the newer 9x19 defensive loads. My personal favorites being Federal HST or Winchester RA9T. They are exceedingly effective, lower recoil, and yield lessened wear on a 9MM as well as drastically improved accuracy on the part of the shooter under stress.

If you really want .40, I'd suggest checking out the PX4. It's the only .40 Platform I enjoy shooting outside of a full size USP in .40 personally.


FWIW, .45GAP caught my interest recently, and even that is far more pleasant to shoot in a 9MM size platform than .40 IMHO. Of course, you know what they say about opinions and how everyone has them....



Now, if we're talking about USPSA or the like, I can see your desire, but unfortunately a US Made .40S&W 90 series will not be happening in the forseeable future.

I actually have all sizes of the PX4 in .40 & a few .40 Cougars. I have a .45 PX4 & I built a .45 PX4/Cougar Hybrid.

What I like most about the 96’s is that you can simply have a 9mm barrel & have the ability to shoot either caliber. Plus, there’s the option of aftermarket 357Sig barrels

[Suvorov]

Nobody ever said enabling was helping.

You are simply directing people to knowledge. Unless you are a certain serpent in an apple tree - what harm could you be doing?

And if he spends a few more bucks, VIP20 will get him $20 off (but only if he buys today).

[Duelist]

Wow, this is something that I didn’t know I needed.


But I’m in the middle of paying off some stuff, so I’ll have to hold off and watch them all sell out.

[revchuck38]

Wow, this is something that I didn’t know I needed.


But I’m in the middle of paying off some stuff, so I’ll have to hold off and watch them all sell out.

Ditto. I'll have to content myself with my PX4 D.

[Vista461]

I saw some on a certain auction site too.
Tempting, but I too am low on funds at the moment

[CraigS]

@e_stern. Do these come with the over grip that simulates a standard 92?

If not, are those grips available currently from Beretta.

They sell the rubber overmold grip in brown and black. The G10 wrap around grip even looks pretty good on a tan M9A3.
20191112_160804 by craig stuard, on Flickr
I think having all the control levers in black helps it fit in.

[e_stern]

I actually have all sizes of the PX4 in .40 & a few .40 Cougars. I have a .45 PX4 & I built a .45 PX4/Cougar Hybrid.

What I like most about the 96’s is that you can simply have a 9mm barrel & have the ability to shoot either caliber. Plus, there’s the option of aftermarket 357Sig barrels

I'd be interested in seeing that Hybrid... I have a spare PX4 .45 slide lying around right now...

As for this model, I can tell you that it will not be made in .40 at all.