Page 46 of 48 FirstFirst ... 364445464748 LastLast
Results 451 to 460 of 476

Thread: M&P Core

  1. #451
    Site Supporter
    Join Date
    Oct 2012
    Location
    Michigan
    Quote Originally Posted by GJM View Post
    I have shot CORE pistols for 12 months. I had a screw shear on one slide and Smith replaced it. No other failures, excepting the 509T issues which was a Chip Wiz issue. I have been using OEM, Chip Wiz and C More plates.
    Thanks for the info.

  2. #452
    Member
    Join Date
    Jul 2017
    Location
    Missouri
    Iíve been shooting a 1.0 core milled to 2.0 dimensions, with a chpws plate and revised DPP since spring. Probably 8 matches and weekly practice. No issues.

  3. #453
    @GJM Any updates on your CHPWS 509t plate loosening issues? (too many posts to choose which one to quote)

    I had my CH plate come loose on my 2.0 Compact OR (509t) - https://pistol-forum.com/showthread....=1#post1265954 (I also almost send SoCalDep off the deep end)

    I've since removed all screws, soaked in acetone and re-torqued with Loctite 248 Stick; also torqued a little higher (12-13 inch-lbs). This is with their newer 509t plate that just came out last month. Here's a picture from before my first range trip -

    Name:  chpws-509t-plate.jpg
Views: 199
Size:  26.6 KB

    (I know I need a thinner marker) When I removed the optic I forgot to look at the witness marks but the left screw was definitely loose. Probably won't get to the range again until early next month - hoping the Loctite fixes the issue.

  4. #454
    No update, I haven't shot it in months.
    Likes pretty much everything in every caliber.

  5. #455
    Just to clarify gentlemen;

    This is only happening with the 509t on the core with chpws? Is it happening with the rmr/SRO plates too by chpws or are they gtg?

  6. #456
    Re. gen2 CHPWS's for SRO's, my 2 have been GTG on two gen2 CORE's w/ 1000+ down range.
    Last edited by OldRunner/CSAT Neighbor; 09-17-2021 at 06:48 PM.

  7. #457
    Quote Originally Posted by newyork View Post
    Just to clarify gentlemen;

    This is only happening with the 509t on the core with chpws? Is it happening with the rmr/SRO plates too by chpws or are they gtg?
    Just a 509T issue.
    Likes pretty much everything in every caliber.

  8. #458
    Thank you guys!

  9. #459
    Gear Whore Extraordinaire
    Join Date
    Feb 2011
    Location
    Nowhere
    Maple leaf is now cutting M&P's for the 509t. That makes three to my knowledge - ATEI, Floyd's, and now Maple Leaf doing direct mounts.

    https://www.mapleleaffirearms.com/mp509t
    "He bows with his front, watches out with his sides, and feels his way with his rear."

  10. #460
    Quote Originally Posted by backtrail540 View Post
    Maple leaf is now cutting M&P's for the 509t. That makes three to my knowledge - ATEI, Floyd's, and now Maple Leaf doing direct mounts.

    https://www.mapleleaffirearms.com/mp509t
    Have they also started doing an Acro cut?
    Likes pretty much everything in every caliber.

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •