Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: help me find a LPK

  1. #1

    help me find a LPK

    Got a spikes lower I want to fill with premium parts for my AR pistol

    need a trigger: prefer something like the bcm pnt

    Buffer tube system

    LPK

    Pistol grip suggestions.


    thanks guys and ladies

  2. #2
    I like larues stuff. Definitely check out the larue mbt trigger. Fantastic trigger. I like there receiver extensions, stocks, and grips. Not sure if that makes me a fan boy or not but they make good stuff. LPKs seem to be out of stock or back ordered just about every where. Sionics appears to be about 14 days out for there’s.
    Instagram: sometimesishootCs

  3. #3
    Quote Originally Posted by breakingtime91 View Post
    Got a spikes lower I want to fill with premium parts for my AR pistol

    need a trigger: prefer something like the bcm pnt

    Buffer tube system

    LPK

    Pistol grip suggestions.


    thanks guys and ladies
    SOLGW has their carbine receiver extension kits in stock. With an H2 and Sprinco blue spring it comes out to about $110. My preferred LPKs (Sionics and SOLGW) seem to be out of stock everywhere I normally shop.
    My posts only represent my personal opinion and do not necessarily reflect the opinions or official policies of any employer, past or present. Obvious spelling errors are likely the result of an iPhone keyboard.

  4. #4
    Quote Originally Posted by breakingtime91 View Post
    Got a spikes lower I want to fill with premium parts for my AR pistol

    need a trigger: prefer something like the bcm pnt

    Buffer tube system

    LPK

    Pistol grip suggestions.


    thanks guys and ladies
    LPK's are a little scarce right now. This would take care of the LPK, trigger that is similar to the BCM PNT, and a Magpul K2 grip, if you can deal with the 10-14 day lead time. The Sionics LPK's are Schmid Tool sourced and are very good quality. I just installed one a month or so ago in my LMT lower.

    http://sionicsweaponsystems.com/stor...3-carrier.html

    If you don't want to wait, this Daniel Defense LPK, also Schmid Tool sourced last time I used one, is in stock but it costs more money, and has a lowly A2 grip, and a basic milspec trigger.

    https://lanbosarmory.com/index.php?m...ducts_id=16867

  5. #5
    Member
    Join Date
    May 2019
    Location
    Lititz, PA
    CMMG is the best that I have used and will spend extra on them from now on. If you have to go cheap, go cheap. If not spend the $$$ on something better. You won't regret it down the road. Speaking from experience.

  6. #6
    Site Supporter Norville's Avatar
    Join Date
    Jan 2017
    Location
    WI
    Picked up one of these but haven’t built it yet:

    https://www.primaryarms.com/cmc-trig...product-review


    The BCM trigger I have is OK, have heard good things about the Larue.

  7. #7
    I'd wait for Sionics / BCM / SOLGW to restock LPK and receiver extension parts. All three are known quantities for the parts you're after and all three offer a comparable slicked up mil-spec trigger. If you gotta have it now, go to Specialized Armament and order Colt bits & pieces ala carte. Then hit up Brownells or Primary Arms using the links at the top of this page for the trigger and grip in whatever flavor floats your boat.

  8. #8
    What I like and why:

    Radian Talon ambi safety - 45 degree, good materials, stays together without screws
    Norgon ambi catch - just cuz
    Bad-EPS pins - slick design for easier installation, good materials, help fitting some uppers
    Reptilia Grip - like the angle, no finger grooves, perfect length for me (~G19)
    Balance of parts I get Colt because of consistent quality

  9. #9
    Quote Originally Posted by Casual Friday View Post
    LPK's are a little scarce right now. This would take care of the LPK, trigger that is similar to the BCM PNT, and a Magpul K2 grip, if you can deal with the 10-14 day lead time. The Sionics LPK's are Schmid Tool sourced and are very good quality. I just installed one a month or so ago in my LMT lower.

    http://sionicsweaponsystems.com/stor...3-carrier.html

    If you don't want to wait, this Daniel Defense LPK, also Schmid Tool sourced last time I used one, is in stock but it costs more money, and has a lowly A2 grip, and a basic milspec trigger.

    https://lanbosarmory.com/index.php?m...ducts_id=16867

    Second the recommendation for ^ that Sionics LPK.
    The NP3'd trigger components are very nice (as are the BCM & ALG triggers).

    All the other pieces/parts you need can be sourced from them as well - like the Receiver Extension Kit.

    http://sionicsweaponsystems.com/stor...3-carrier.html
    Last edited by tango-papa; 07-03-2020 at 01:10 PM.

  10. #10
    Site Supporter
    Join Date
    Dec 2015
    Location
    Ohio
    Sionics, or Forward Controls Design if you want some Guuci

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •