ZT 0350: It's Great. Is there anything better?

[Crawls]

You could take a look at the Spyderco Shaman. It's similiar to the PM2 with an added dash of pry bar sprinkled in.

The LionSteel TM1 also looks like a sweet hard use folder that would be a good EDC.

[JCS]

I would go with a Microtech Socom Elite Manual. American company and American made. Premium steel with a great heat treat. Thick blade but is ground very thin and will cut excellent. Also it is a tip down carry only knife.

[XXXsilverXXX]

My wife really enjoys her PM3, and I like my cheapo Kershaw static, and the custom benchmade 556 she got me for our 1st anniversary.

[Snapshot]

I have a ZT0300 and a ZT0301, they are great knives but I find them a bit bulky for carry in casual clothing, and I mostly don't need the wide thick blade. Also I sometimes need to access restricted areas and although I have credentials I am always worried about having a nice knife confiscated because... reasons.

For the last few years I have been carrying a Cold Steel "Broken Skull". Yes I know Steve Austin etc. etc. but these are simple knives with ambidextrous thumb stud and clip (tip up), not assisted, and they are quite thin and light for the size of the blade (3.75"). They are not expensive so I have a couple of them, of course since they are not expensive they never get lost or stolen or confiscated as would likely happen with a expensive knife.

Mine does not see heavy use but it seems to hold up find for slicing, slitting, poking and other EDC tasks.

[Navin Johnson]

So, for the last several years, I've carried a ZT350. It's easy to handle, stays closed point-down when in my pocket, opens easily, is a good average size, isn't too tactical to use, and can be used as a pry-bar when required. The mechanical action is smooth and the stainless steel has resisted the elements well. It's the Glock of knives. It's not sexy, but it's perfect.

But now I lost mine.

I'm likely to just buy another one, but.... I find myself wondering if there's anything more perfect out there.

Any other folding knife I should be considering? Requirements:

1. Not an auto, but assisted opening is OK. Un-assisted is also OK, so long as we're talking one-handed opening. "Wave" is not OK in my state.
2. Cost isn't an issue but I should be reasonably able to replace it if it ends up in a lake.
3. It's going to be used and occasionally misused. I had a Benchmade once with a little itty-bitty blade profile. No.
4. Blade down. I have a super nice Chris Reeve's Sebenza that would be my favorite knife, except I've stabbed myself reaching for it like 4 times.

Would not recommend a Spyderco....They lean much more on cutting uses than screwdriver uses.

If the ZT worked before it will work again

[Clusterfrack]

Or put one of these mini pry bars in your pocket or wallet and only use your knife for cutting?

https://countycomm.com/collections/v...bar-multi-pack

https://countycomm.com/collections/v...widgy-pry-bars

At a match a while back, a PCC shooter had a doublefeed death jam in his MPX, and asked to use my knife. WTF? Like I’m going to let him ruin a $250 knife that can’t be replaced to clear his gun? I handed him my Widgy Prybar instead. I keep one handy for just that sort of thing.

[TheRoland]

I took a gamble and bought a Spyderco PM2 in SV110, sight unseen. We'll see if the fact that it's a knife and not a pry-bar frustrates me.

Thanks for all the advice. Obviously I'll repay with a picture once it gets here.

[blues]

I took a gamble and bought a Spyderco PM2 in SV110, sight unseen. We'll see if the fact that it's a knife and not a pry-bar frustrates me.

Thanks for all the advice. Obviously I'll repay with a picture once it gets here.

Congrats. For seven and a half bucks, get one of these and put it on your keychain or in pocket:





https://www.amazon.com/Swiss-Tech-ST...%2C214&sr=8-49

[TheRoland]

Finally had my PM2 arrive, somewhat slowly due to the current unpleasantness.

My previous experience with Spyderco was limited but I remember them feeling too light. This one is about as light as I'd like to go, but has enough heft to not feel cheap in my hand. The fit and finish is nice, the blade profile is thick enough that I can abuse it a little, I think. Lockup is solid, and I like the reverse-liner-lock it has going. It opens quickly and closes under its own weight when unlocked. I'm a fan; it was a good recommendation, and very likely to be my new daily companion. I suspect won't be the last Spyderco I buy, although I'll be aiming for blade profiles no lighter than this one.

Here's a picture that includes pandemic day-drinking:




Thanks everyone for the guidance.

[blues]

Congrats...

Don't abuse it too much as you may break the tip. Try not to apply much lateral force. It will cut like a banshee for a long time...even after it loses its initial sharpness.

You'll want diamond hones, whether bench stones, rods, or whatever style you prefer...but diamond will be your friend here.

If you don't need a particularly fine edge, something between 320 and 600 grit (coarse to fine) will be perfect for that steel. (Based upon many, many recommendations from highly regarded sources.)