Spyderco Enuff 2

[RevolverRob]

Intriguing option that is new for this year https://www.knifecenter.com/item/SPF...polymer-sheath. Looks like it might be a good option for a larger blade where the handle is scaled appropriately for one hand. My biggest complaint with most knives with blades over 3.5" is that the handle tends to scale with the blade, when it doesn't need to.



Sheath looks like trash for serious carry though. Probably fine for field carry, but otherwise too bulk for IWB.



Wish it was reverse edge, but for those who favor forward grip and/or the various Sayoc-style or Amtac/Tracker Dan style blades this is could be a nice option. Price wise it hits the button as well.

[PNWTO]

https://rkcustomkydex.shop/collectio...2-kydex-sheath

Not the best but probably very workable with a DCC clip.

[RevolverRob]

https://rkcustomkydex.shop/collectio...2-kydex-sheath

Not the best but probably very workable with a DCC clip.

That's definitely a good step forward!

I was thinking some kind of deep carry with a center mounted DCC.

[Totem Polar]

Good catch Rob. That is a great looking knife, with great lines/profile.

[PNWTO]

That's definitely a good step forward!

I was thinking some kind of deep carry with a center mounted DCC.

You know… I’m bored enough that after the kids are in bed I’m going to order one of these blades, that RK sheath, and play around it with all in terms of clip additions/setup.

Will report back in time.

Maybe I’ll even email DSG and see if Tom has time to whip something in up the future, but I know he’s busy.

[RevolverRob]

Good catch Rob. That is a great looking knife, with great lines/profile.

The profile is what caught my eye. I was flipping through KnifeCenter since they're doing their Spyderco sale. Scrolled past and thought, "When did Spyderco start making a sgian duhb?" And scrolled back. The more I looked at it, more I saw to like.

Also, since it's in the "Enuff" frame, the various aftermarket Enuff scales should fit. So for us, "Can't leave it alone" geeks custom scales are an option.

[PNWTO]

Alright, so blade, sheath, and a variety of DCC clips to start with are inbound.

[Tannhauser]

Are micarta Enuff scales available on the secondary market?

[PNWTO]

Update-

Received the knife. First impressions are that it’s pretty legit. Great ergos, handling, and no one does serrations like Spyderco.

The OEM sheath is utter dogshit. Could be pressed into service, with some minor non-destructive changes, for use in a carrier kangaroo pouch or similar. Beyond that, it’s best for folks who open carry XDs and drive lifted diesels.

The RK sheath hasn’t shipped but will get some photos up in the next few days; including some last-resort, marooned on Mars, ideas for the factory sheath.

[Navin Johnson]

I believe sheath is made by Sal's (Spyderco's owner) daughter's company

I played with one. It is secure and functional (and strap can be removed) but it did rattle a bit.

Will likely own K390 PE version at some point