VP9 Trigger Springs

[kcevans]

Has anybody spent time working with the trigger on a VP9. I have a P2000 LEM and years ago used TLG recommendations on mixing the springs to get a 6.0 to 6.5 trigger pull. The only thing I can find for the VP9 is a trigger reduction kit, the current pulls are good but I would like to increase the one I would like to start using for CCW.

Thanks in advance for any suggestions

[LtDave]

I recently acquired a used VP9 that had a reduced power trigger return spring installed. I did not care for the reset and replaced the TRS with a factory one. Much better and now comparable to my VP9s with factory triggers. You definitely need/want the special pliers to do the work, but it is otherwise very simple to swap out the TRS.