Results 1 to 4 of 4

Thread: Glock trigger rough after 18k rounds

  1. #1

    Question Glock trigger rough after 18k rounds

    G17.4 with stock internals, no polishing work. Cleaned every 300 rounds, paying attention to wipe the connector/trigger bar contact surfaces clean before reapplying a drop of Lucas oil. RSA replaced every 5k.

    Crossing 18k rounds, it lost that slight bit of roll that the Dot connector provides and instead, gives a harsh break after the wall.Took it apart and found plating wear to the firing pin plunger and some wear to the cruciform. Looks like craters instead of tool marks but no plating has flaked off the cruciform yet. Striker channel is clear of any debris and the striker itself shows no signs of flaking or irregular wear.

    My first thought is to replace the trigger bar, connector, and firing pin plunger with fresh OEM parts. Would this likely solve my trigger pull problems? I've never shot this much ammo through a personally owned Glock so the degradation is something I've not encountered before.

  2. #2
    BIDET MUAD'DIB LittleLebowski's Avatar
    Join Date
    Feb 2011
    Location
    VA
    Id replace with a polished OEM.

  3. #3
    Member
    Join Date
    Feb 2011
    Location
    Allen, TX
    Replace the trigger/trigger bar and the connector with OEM parts.
    Regional Government Sales Manager for Aimpoint, Inc. USA
    Co-owner Hardwired Tactical Shooting (HiTS)

  4. #4
    Thanks! Will do.

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •