Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Ballistic Advantage 9mm barrel

  1. #1
    Site Supporter CCT125US's Avatar
    Join Date
    Apr 2011
    Location
    Lane 7, behind the gun.

    Ballistic Advantage 9mm barrel

    This 9mm chambered 5.5 inch Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and 1/2-28 x .400 full profile threads.

    Designed to work with both Colt/RR and Glock style AR builds.
    Compatible with standard mil-spec uppers. There are also numerous dedicated 9mm upper options that work.
    Requires the use of a unique magwell conversion (Colt/Rock River style) with UZI mags or a dedicated 9mm lower with Glock mags.
    9mm on an AR15 platform operates by blowback and does not need a gas block or gas tube.
    Threaded 1/2x28 instead of 1/2x36 to give you greater versatility when choosing a suppressor.
    Integrated feed ramp and barrel extension.
    Since the “barrel extension” is an integral part of the barrel, the length stated is the true overall length. For example, an 11” 9mm barrel has the same outer dimensions/length as a 10.5” 5.56 barrel.
    IMPORTANT: A standard 1/2x28 flash hider will not have enough clearance for a 9mm round to pass.
    Before installing a muzzle device, ensure a 9mm round will drop freely through the muzzle device bore.
    You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Possession of this barrel along with a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm.

    Additional Info
    Length 5.5"
    Material 4150 Chrome Moly Vanadium
    Profile Straight
    Finish QPQ Corrosion Resistant
    Gas System Length Blowback
    Gas Block Journal Blowback Gas System - No Gas Block
    Twist Rate 1:10 inches
    Muzzle 1/2x28 Threaded
    Weight 9.6oz

    This was used in PSA build, that would not present my flat point subs at the correct angle. You can see on the first pic where rounds would impact the barrel. In the description it clearly states for use in Colt/RR and Glock style builds. When run suppressed, the bolt slap was not acceptable for me. With that being said, I am hoping someone down the road can get some use out of it. I'll let this run for several weeks and then pick a name randomly.
    Name:  20200322_103404.jpg
Views: 192
Size:  14.2 KB
    Name:  20200322_103546.jpg
Views: 202
Size:  24.9 KB
    Name:  20200322_104451.jpg
Views: 201
Size:  16.1 KB
    SWYNTS

  2. #2
    Unsmooth Operator awp_101's Avatar
    Join Date
    Sep 2017
    Location
    DFW
    Please put my name in the hat. That barrel makes me want to do some experimenting and comparisons.

    Thanks!
    Do the right thing. It will gratify some people and astonish the rest. - Mark Twain

    Purveyor of useless knowledge and mediocre humor

  3. #3
    Site Supporter CCT125US's Avatar
    Join Date
    Apr 2011
    Location
    Lane 7, behind the gun.
    Obligatory pic of the build. Octane 9HD with 3 lug mount tucked under an ALG rail.
    Name:  20190319_172053.jpg
Views: 154
Size:  64.1 KB
    SWYNTS

  4. #4
    Site Supporter
    Join Date
    May 2012
    Location
    Central Wisconsin
    In, please! And thank you!
    You wouldn't have PC to arrest Joe Dirtbag, but you could certainly have one hell of a mere conversation. - Lester Polfus

  5. #5
    Site Supporter 5pins's Avatar
    Join Date
    Nov 2011
    Location
    Charles Town, WV
    Id like to put my name in the hat.

  6. #6
    Member
    Join Date
    Jul 2015
    Location
    Northern Utah
    I'll put my name in as well, thanks!

  7. #7
    In please and thank you

  8. #8
    Site Supporter
    Join Date
    Sep 2016
    Location
    Northern Illinois
    In, please - thanks!
    Ken

    BBI: ...”you better not forget the safe word because shit's about to get weird”...

  9. #9
    Site Supporter psalms144.1's Avatar
    Join Date
    Jun 2012
    Location
    Bloomington, IN
    I'm in for this as well - could solve my PDW wants...

  10. #10
    Member Keebsley's Avatar
    Join Date
    Feb 2011
    Location
    Idaho
    I had to sell my last PCC and want to build another so this would do nicely. I'd like to put my name in the hat as well. Thanks.

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •