Results 1 to 4 of 4

Thread: Will a G decocker kit work with a .22 conversion kit?

  1. #1
    Site Supporter SeriousStudent's Avatar
    Join Date
    Mar 2012
    Location
    Texas

    Will a G decocker kit work with a .22 conversion kit?

    Good afternoon,

    I snagged one of the .22 top-end conversion kits earlier this year. I have it on an old Vertec frame, and it runs like a champ!

    https://www.berettausa.com/en-us/ber...10-round-mag-/

    I would like to change it over to a set of G decocker levers, so it matches my other two Vertecs.

    Is this possible? If It's going to be unsafe or cause accelerated wear, I will obviously leave the original levers in place.

    As an FYI, I swapped out the factory barrel for a threaded Beretta .22 barrel. It makes for a very sweet suppressed sub-caliber trainer.

    https://www.berettausa.com/en-us/ber...readed-barrel/

    Thanks in advance for any insight that is offered.
    Last edited by SeriousStudent; 11-19-2019 at 05:12 PM.

  2. #2
    Quote Originally Posted by SeriousStudent View Post
    Good afternoon,

    I snagged one of the .22 top-end conversion kits earlier this year. I have it on an old Vertec frame, and it runs like a champ!

    https://www.berettausa.com/en-us/ber...10-round-mag-/

    I would like to change it over to a set of G decocker levers, so it matches my other two Vertecs.

    Is this possible? If It's going to be unsafe or cause accelerated wear, I will obviously leave the original levers in place.

    As an FYI, I swapped out the factory barrel for a threaded Beretta .22 barrel. It makes for a very sweet suppressed sub-caliber trainer.

    https://www.berettausa.com/en-us/ber...readed-barrel/

    Thanks in advance for any insight that is offered.

    Unfortunately it will not.
    Product Manager - Tactical and Pro Shop

    Beretta USA Corporation

  3. #3
    Site Supporter SeriousStudent's Avatar
    Join Date
    Mar 2012
    Location
    Texas
    Thank you, Mr Stern. You just saved me 60 clams and a lot of frustration.

    Have a great week, and thanks very much for the speedy response.

  4. #4
    Quote Originally Posted by SeriousStudent View Post
    Thank you, Mr Stern. You just saved me 60 clams and a lot of frustration.

    Have a great week, and thanks very much for the speedy response.
    You got it. Sorry, that's been one of my white whales for a while. The .22 Kit just doesn't have enough room for a G variant decocker with the way it was developed. :/
    Product Manager - Tactical and Pro Shop

    Beretta USA Corporation

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •