So, this was just a fun project for John. He had someone on the inside at Beretta track down a 92D Vertec Slide. Then he sent me that along with a brand new Elite LTT. We converted it to D and did the trigger work. It has a 12# hammer spring in it, which works more reliably in the D because of the solid one-piece firing pin. On top of that when you take away the sear rubbing on the front of the hammer and all the polishing we do, the DA is crazy smooth and light. Barly 5 lbs depending on where you measure on the trigger. Anyway, it is a 16, 18 or 19 shot K-frame depending on which mag you use. Could be a 21 shot K Frame with the right mag.
There are no plans to build guns this way unless we get crushed with requests (and I don't mean you and your 5 buddies that would buy one right away if it was less than $600). I know some of you love the idea, but the numbers don't lie and if the market supported building D models, Beretta would still be making them and they would pull a pretty penny on the Police Trade-in market.
www.langdontactical.com
Bellator,Doctus,Armatus
LTT offered me free Kydex holsters. I've had two misadventures where a Centurion jacked itself out of a IWB Kydex holster at 3:00. I've decided that I really need retention such as a thumb-break, and I've only seen those on Leather holsters. If you know of a maker who puts something like a thumb-break on a Kydex holster, I will be the first person in line to buy one.
Last edited by NuJudge; 12-03-2019 at 05:09 PM.