If it were handguns instead of rifles that we were discussing, would you want to put a few Taurus or Keltecs away or one Glock/Sig/HK?
I'd buy one Colt, Daniel Defense, or BCM then stack a few stripped lowers away.
If it were handguns instead of rifles that we were discussing, would you want to put a few Taurus or Keltecs away or one Glock/Sig/HK?
I'd buy one Colt, Daniel Defense, or BCM then stack a few stripped lowers away.
Yeah I’m with most of the others here. Realistically, parts availability and prices will go up and down but the lower is really the only part that anyone will ever be able to control. Even then, it’d be unlikely in most states IMO. There’s just too damn many of them out there. So that being said, one good one and a few stripped lowers is a solid move to play. I have a PSA that’s worked great for almost 1k rounds, but it just doesn’t give me the piece of mind that I’d want if it were my only rifle. Get a BCM right now and then stockpile a few Aero stripped lowers and you’ll be covered. The used market is still pretty soft. If you keep an eye on ARFCOM’s EE, there are some decent deals to be had.
Sent from my iPhone using Tapatalk
Def seeing the trend in your replies, thanks guys.
When getting the lower, is it beneficial to get the receiver with it? For a better fit maybe? With Trigger guard or without?
Last edited by Isaac; 09-19-2019 at 08:21 AM.
Sorta around sometimes for some of your shitty mod needs.
Just one sample but I was in a class recently with a guy running a sport 2 and his castle nut was not staked, so if you get one you would want to check that and get it staked if it is not.
Sent from my Pixel 3 using Tapatalk
It might be a good idea to get an upper and lower from the same manufacturer, but these things really are mass produced items that as long as there are no errors are what they are.
As far as the trigger guard, some of them are integral, but it is an inexpensive piece that there are many options out there. One advantage of buying on with an integral trigger guard is that you will not have to install a trigger guard. The little tabs are supposed to be pretty fragile and the simple ones require you to drive a roll pin through the fragile tabs.
I'll second this.
A long time ago there was a serious delta between the lower end of the market and the standard of the Colt. The market has improved dramatically and there are manufacturers at the low end making guns that are far superior to what they used to be. If I had to bet my life on a gun right out of the box, it would be a Colt 6920.
If I wanted to buy a gun that I could just put an optic on and never really fiddle with apart from maybe changing some furniture, it would be a Colt 6920.
If, however, you're looking for a gun that is less expensive but still has good manufacturer support then the S&W Sport guns are an excellent option.
And while it's easy to piss on PSA because of their price point, they have done a whole lot to improve their product line. I wanted to screw around with the AR pistol concept so on a lark I bought a PSA pistol setup with one of their nitrided barrel uppers. I put a nitrided Brownell's bolt carrier group in it and to my pleasant surprise the gun runs and shoots pretty accurately, too.
I'm a lot less inclined to dismiss the lower end stuff than I was some years ago, especially after watching multiple samples of M&P Sport guns with cheap variable power optics on them run extremely well in class and have no problem hitting reduced sized silhouette targets 300 yards away with ease.
If you go with something on the lower end just be prepared to deal with some QC issues.
Last edited by TCinVA; 09-19-2019 at 02:49 PM.
3/15/2016
In recently bought a Palmetto upper and assembled lower. They required tightening and staking, but so far I’m very impressed with the quality relative to the price.
But, I would choose BCM if you want an out of the box gun you can trust.
“There is no growth in the comfort zone.”--Jocko Willink
"You can never have too many knives." --Joe Ambercrombie