SIG P320 XFive Legion

[HeavyDuty]

Y’all need to find a really good tool and die maker that can do proper side by side measurements between the two types of slides.

[GJM]

https://www.zevtechnologies.com/ZEV-...Optic-Cut-Gray

Would a Zev slide be a good standing for the X5 slide?

Not sure because I haven't shot one for accuracy. Think it limits you to the RMR/SRO footprint and no provision for a Romeo 3 Max.

[HeavyDuty]

SIG changes specs like my GF changes panties.

This is the widely reproduced pic from CHPWS:



And this is my recent production X5 Legion:



What exactly will direct fit? Romeo1 Pro, RMR, SRO, anything else? A Acro with an Apex adapter plate?

[Eyesquared]

SIG changes specs like my GF changes panties.

This is the widely reproduced pic from CHPWS:



And this is my recent production X5 Legion:



What exactly will direct fit? Romeo1 Pro, RMR, SRO, anything else? A Acro with an Apex adapter plate?

Looks like DPP will fit too.

[DpdG]

What exactly will direct fit? Romeo1 Pro, RMR, SRO, anything else? A Acro with an Apex adapter plate?

I'm not an expert, but I'm fairly certain a R1P or DPP will be direct fit and fit the cut pretty precisely. A RMR will also fit and screw directly in using the second set of holes, but it will not have recoil lugs that are commonly used for the RMR, although C&H makes a sandwich plate to add recoil lugs. Numerous makers produce adapter plates to go to just about any optic.

[GJM]

Glock Store 320 trigger kit, which has lots of buzz, is finally out, and only $25:

https://www.glockstore.com/Competiti...-for-Sig-P320s

[jbrimlow]

Glock Store 320 trigger kit, which has lots of buzz, is finally out, and only $25:

https://www.glockstore.com/Competiti...-for-Sig-P320s

That's pretty cool, but I don't think it offers much to those of us that have a Grayguns kit already. Unless the spring weights are really different.

I like the low priced option though.

[GJM]

That's pretty cool, but I don't think it offers much to those of us that have a Grayguns kit already. Unless the spring weights are really different.

I like the low priced option though.

A friend had a prototype and it was awesome -- heard Max is using this.

[DDTSGM]

A friend had a prototype and it was awesome -- heard Max is using this.

I watched the video, that Lanny is sure a salesman! He said, and the packaging indicates it is MM endorsed. I ordered one. I think I'll just install the large over-travel bushing first, see what that's like and then add the trigger spring to see how the reset is.

I've spent more on sillier stuff.

[GJM]

I watched the video, that Lanny is sure a salesman! He said, and the packaging indicates it is MM endorsed. I ordered one. I think I'll just install the large over-travel bushing first, see what that's like and then add the trigger spring to see how the reset is.

I've spent more on sillier stuff.

At $25, if it works as well as the other options, it will make some other vendors unhappy.