What bulk 9mm bullets are you guys buying to reload for Glock pistols? I'd like to stick to 124 or 125 gr.
What bulk 9mm bullets are you guys buying to reload for Glock pistols? I'd like to stick to 124 or 125 gr.
Last edited by KevH; 06-08-2019 at 11:01 PM.
These with Titegroup.
https://gallantbullets.com/collectio...5gr-round-nose
#RESIST
I use 147 grain FP Blue Bullets, but they also offer 125 grain.
https://www.thebluebullets.com/category-s/1913.htm
https://www.thebluebullets.com/category-s/1833.htm
My experience with these is not Glock specific, but in quantity these FMJs are just a few bucks more than any option I have found. I have used a buttload of the 115g:
https://www.evergladesammo.com/bulle...j-bullets.html
and they have these in 124g:
https://www.evergladesammo.com/bulle...j-bullets.html
The blue bullets
I use a lot of SNS casting.
Sent from my moto g(6) using Tapatalk
I like the Bayou 124 coated. It has a distinct shoulder so you can load it like a SWC with that shoulder at or just short of the rifling. Avoids a lot of the short throat syndrome.
There are probably other brands out of the same mould; until the no lube groove patterns got popular for coating, commercial cast bullets were nearly all Magmas.
Last edited by Jim Watson; 06-09-2019 at 11:26 AM.
Code Name: JET STREAM
I prefer Montana Gold, but the cheapest I've found locally is Rainier Ballistics or HSM plated.
Lately been using the HSMs, 124gr, with Titegroup. 4.3 gr. Very accurate in my Glocks.
Also not Glock specific, but I've had good luck with their 124s in my PX4s, CZ-75s, SIG P6, and Walther P99C. Note that they're SAAMI spec; they measure .354- and may not work with some sizer dies. I've used the Lee standard and their tighter spec sizer dies and both worked for me. They're the cheapest decent 9mm bullets I've found.