Page 1 of 5 123 ... LastLast
Results 1 to 10 of 44

Thread: What bulk 9mm for Glocks?

  1. #1
    Site Supporter KevH's Avatar
    Join Date
    Feb 2011
    Location
    Contra Costa County, CA

    What bulk 9mm bullet for Glocks?

    What bulk 9mm bullets are you guys buying to reload for Glock pistols? I'd like to stick to 124 or 125 gr.
    Last edited by KevH; 06-08-2019 at 11:01 PM.

  2. #2

  3. #3

  4. #4
    Site Supporter CleverNickname's Avatar
    Join Date
    Aug 2016
    Location
    TX
    I use 147 grain FP Blue Bullets, but they also offer 125 grain.

    https://www.thebluebullets.com/category-s/1913.htm
    https://www.thebluebullets.com/category-s/1833.htm

  5. #5
    My experience with these is not Glock specific, but in quantity these FMJs are just a few bucks more than any option I have found. I have used a buttload of the 115g:
    https://www.evergladesammo.com/bulle...j-bullets.html
    and they have these in 124g:
    https://www.evergladesammo.com/bulle...j-bullets.html

  6. #6
    Member
    Join Date
    Sep 2015
    Location
    Alabama
    The blue bullets

  7. #7
    Site Supporter
    Join Date
    Nov 2013
    Location
    Illinois
    I use a lot of SNS casting.

    Sent from my moto g(6) using Tapatalk

  8. #8
    I like the Bayou 124 coated. It has a distinct shoulder so you can load it like a SWC with that shoulder at or just short of the rifling. Avoids a lot of the short throat syndrome.

    There are probably other brands out of the same mould; until the no lube groove patterns got popular for coating, commercial cast bullets were nearly all Magmas.
    Last edited by Jim Watson; 06-09-2019 at 11:26 AM.
    Code Name: JET STREAM

  9. #9
    I prefer Montana Gold, but the cheapest I've found locally is Rainier Ballistics or HSM plated.

    Lately been using the HSMs, 124gr, with Titegroup. 4.3 gr. Very accurate in my Glocks.

  10. #10
    Site Supporter
    Join Date
    Sep 2017
    Location
    South Louisiana
    Quote Originally Posted by mmc45414 View Post
    My experience with these is not Glock specific, but in quantity these FMJs are just a few bucks more than any option I have found. I have used a buttload of the 115g:
    https://www.evergladesammo.com/bulle...j-bullets.html
    and they have these in 124g:
    https://www.evergladesammo.com/bulle...j-bullets.html
    Also not Glock specific, but I've had good luck with their 124s in my PX4s, CZ-75s, SIG P6, and Walther P99C. Note that they're SAAMI spec; they measure .354- and may not work with some sizer dies. I've used the Lee standard and their tighter spec sizer dies and both worked for me. They're the cheapest decent 9mm bullets I've found.

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •