When 158 grain bullets have no problem going 1000-1250fps?
I'd think a 125/130 should easily be able to do the same.
When 158 grain bullets have no problem going 1000-1250fps?
I'd think a 125/130 should easily be able to do the same.
Look at the relative pressures between .357 Magnum and .38 Spl (even +P) and you'll get your answer.
Funny thing, and something I thought about starting a thread relating to this. Very similar modern revolvers are chambered in .38 SPL, 357 magnum and 9x19mm. The latter two generate the same pressure. .38 Spl is spec'ed for much less. We all know why this is (.38 Spl is such an old cartridge, there are still early guns around that can't take nearly the chamber pressures modern guns can.) But, of course by now modern guns predominate. I'm a little surprised that some "rogue" ammo maker doesn't put out a .38 super +p+ that at least approaches 9mm/.357 Magnum pressures, and explicitly declare that the ammo should only be used in guns manufactured after 1970 (to randomly pick a date.) It would have a disclaimer about the overpressure, so if it kabooms your gun, it's on you.
https://www.buffalobore.com/index.ph...t_detail&p=291
https://www.underwoodammo.com/collec...18785707491385
https://www.defensivecarry.com/forum.../125541?page=1
https://www.defensivecarry.com/forum.../topics/118121
I have not chronographed my reloads but 5.2 with unique and 158gr hard cast gives me great accuracy and is much cleaner to shoot than loads under 5grains in terms of leading and carbon or unburnt powder.
And color me surprised. Exactly what I was looking for.
https://www.underwoodammo.com/collec...18785726955577
Last edited by olstyn; 04-16-2019 at 06:21 AM.
I would LOVE to see independent pressure testing of those 38 spl +P loadings that get close to 357 mag velocities...