New Trijicon Pistol Mounted RDS???

[ranger]

Asssuming you don’t have a battery tester, I would first change the battery and tighten the cap a lot, not just to initial resistance.

Troubleshooting today after work:
Removed P10 with SRO from safe - dot still dead
I have spare batteries on hand - common for a lot of my uses
Removed original battery
Original battery tested good on battery tester
Since I had everything opened up - installed new battery
Dot is back on
Per GJM, I insured I had the cover on tight
Will take to range hopefully this weekend
Still not sure of issue (cap slightly loose?) but happy dot is one for now
Note: primary purpose of this pistol is range use - still carrying iron sights
Thanks GJM

[miller_man]

@ranger - do you keep your SRO on auto? If not, do you leave it at your preferred brightness level?

[ranger]

@ranger - do you keep your SRO on auto? If not, do you leave it at your preferred brightness level?

I leave it on auto all the time

[Bart Carter]

The first thing I always check with dot trouble is the battery cap, or if on the bottom, something to push against the battery (like tape). That is almost always the solution.

[GJM]

Regarding Trijicon January announcement — I understand it is rifle scopes and NO new pistol optics.

[Mike C]

Regarding Trijicon January announcement — I understand it is rifle scopes and NO new pistol optics.

Shit! I had my hopes up for mini SRO, guess I'll keep waiting for my glass version of the RMSw to show up. Hopefully soon.

[cjb1911]

Is there an updated SRO coming out? It seems vendors have it on clearance now.

[Alpha Sierra]

Is there an updated SRO coming out? It seems vendors have it on clearance now.

You might be reading too much into the markdowns. There's no way Trijicon would have a new product ready to go and not announce it at SHOT. Or their VP of marketing needs to be fired......

[GJM]

I checked with my “dot connection” and he isn’t aware of anything imminent.

[tyrusasmith]

SRO battery life test result: 1 click down from max brightness, locked in: 13 weeks on the money.

From and including: Saturday, December 21, 2019
To, but not including Saturday, March 21, 2020

It is 91 days from the start date to the end date, but not including the end date.

Or 3 months excluding the end date.

Alternative time units:
2184 hours
13 weeks

I'll do another 2 clicks down, but I might finally get it mounted before then.

I finally got the mill setup at work.

1 click down from max brightness lock-in battery life test started 12-21-19 @ 12:25 pm. Duracell 2032.

Note: factory battery was an Energizer.

I 3d printed my proposed milling result for my P229 to test when our mill gets up and running.

Attachment 46186
Attachment 46187