Page 52 of 55 FirstFirst ... 2425051525354 ... LastLast
Results 511 to 520 of 550

Thread: New Trijicon Pistol Mounted RDS???

  1. #511
    Pre-use impressions of the SRO...



    https://www.vdmsr.com/2019/10/trijic...pressions.html
    Last edited by voodoo_man; 10-24-2019 at 09:42 AM.
    VDMSR.com
    Chief Developer for V Development Group
    Everything I post I do so as a private individual who is not representing any company or organization.

  2. #512
    Sorry for beating a dead horse, but I've seen some conflicting reports.

    I'm 3 months into waiting for a holster (SA-6390RDS-2222-761), but am not sure if it is going to work for my application. Despite the wait, I can cancel and go bark up a different tree (i.e. wait around for Safariland to make a different holster). Can anyone confirm that the 6390RDS will accommodate an SRO on a full size (4.25") M&P 2.0 in 9mm?

  3. #513
    Member tyrusasmith's Avatar
    Join Date
    Sep 2015
    Location
    Down the Bayou
    I just received my 5 MOA SRO to direct mill onto my P229. It will be a fun little project on our new CNC mill.

    So far it seems like max brightness, or 1 click down might be the best options for me in full sun down here in Louisiana.

    I was wondering if anyone has done any "lock-in" battery life testing on the SRO at the different levels? If so can yall point me to that thread. If not, I started max brightness testing today, and I'll report when it dims or dies.
    I'm so cheap I took all the shot up targets from Gabe White's class. Brown tape is cheaper than targets though...

  4. #514
    Quote Originally Posted by tyrusasmith View Post
    I just received my 5 MOA SRO to direct mill onto my P229. It will be a fun little project on our new CNC mill.

    So far it seems like max brightness, or 1 click down might be the best options for me in full sun down here in Louisiana.

    I was wondering if anyone has done any "lock-in" battery life testing on the SRO at the different levels? If so can yall point me to that thread. If not, I started max brightness testing today, and I'll report when it dims or dies.
    My wife ran the OEM battery in a SRO from July, checked it the other day and it was near 100 percent. She would turn it off when not in use.
    Likes pretty much everything in every caliber.

  5. #515
    Member tyrusasmith's Avatar
    Join Date
    Sep 2015
    Location
    Down the Bayou
    Quote Originally Posted by GJM View Post
    My wife ran the OEM battery in a SRO from July, checked it the other day and it was near 100 percent. She would turn it off when not in use.
    Was it a daily carry gun, dryfire, and/or match gun? What setting does she normally have it set to?
    I'm so cheap I took all the shot up targets from Gabe White's class. Brown tape is cheaper than targets though...

  6. #516
    Site Supporter
    Join Date
    Mar 2011
    Location
    West Virginia
    200 rounds shooting in the rain. The loaded chamber viewing hole (M&P 2.0)seems to be spraying powder straight up the glass. It's bad enough when it's dry and the powder isn't all sticking, and some moisture made it worse.

    I think I was on the third mag when a drop of water covered the emitter and murdered the dot.

    That said the grime didn't cause an issue shooting plates out to 40 yards after dark using a WML or handheld.
    Attached Images Attached Images  

  7. #517
    Site Supporter
    Join Date
    Mar 2011
    Location
    West Virginia
    Cat Crap seems to have solved the problem.

  8. #518
    Member tyrusasmith's Avatar
    Join Date
    Sep 2015
    Location
    Down the Bayou
    Quote Originally Posted by tyrusasmith View Post
    I just received my 5 MOA SRO to direct mill onto my P229. It will be a fun little project on our new CNC mill.

    So far it seems like max brightness, or 1 click down might be the best options for me in full sun down here in Louisiana.

    I was wondering if anyone has done any "lock-in" battery life testing on the SRO at the different levels? If so can yall point me to that thread. If not, I started max brightness testing today, and I'll report when it dims or dies.
    SRO Battery life test results at max brightness locked-in: 22.5 days. It showed no signs of low battery or dimming in the previous 12 hours before it died.

    Test duration 11-17-19 @ 10:23 AM to 12-8-19 @ ~10 PM - 6:30 AM the next day.

    The sight wasn't mounted to a gun and remained in a climate controlled house between 70-77 F.

    I'll probably do a 1 click down test next.
    I'm so cheap I took all the shot up targets from Gabe White's class. Brown tape is cheaper than targets though...

  9. #519
    Member tyrusasmith's Avatar
    Join Date
    Sep 2015
    Location
    Down the Bayou
    1 click down from max brightness lock-in battery life test started 12-21-19 @ 12:25 pm. Duracell 2032.

    Note: factory battery was an Energizer.

    I 3d printed my proposed milling result for my P229 to test when our mill gets up and running.

    Name:  IMG_20191221_123006.jpg
Views: 435
Size:  72.7 KB
    Name:  IMG_20191221_123041.jpg
Views: 429
Size:  49.1 KB
    Last edited by tyrusasmith; 12-21-2019 at 12:34 PM.
    I'm so cheap I took all the shot up targets from Gabe White's class. Brown tape is cheaper than targets though...

  10. #520
    So what's coming on 1/8/20? SRO Gen 2?

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •